With this hardware configuration is what can go to version 2.4.4
fmohcine26 last edited by
I do not know if my hardware is compatible with the new update
Thanks for your help
Here is the configuration of my material:
CPU Type Intel(R) Celeron(R) CPU J1900 @ 1.99GHz
4 CPUs: 1 package(s) x 4 core(s)
AES-NI CPU Crypto: No
Storage : 1*MSATA 128 Go
Kernel PTI Enabled
Netgate Device ID: effb96323305ba1ec662
Memory Type:DDR3L, 1.35V
Graphic Cards:Intel HD Graphics
BIOS :AMI 64Mbit Flash ROM
Built-in I/O : 1Mini-PCIE Connector/1Mini-SATA 3Gb/s connector/1*MSATA port
That should run 2.4.4, as long as you're running 64-bit.
Basically if you're on 2.4.x already it will run 2.4.4.
Read the upgrade guide before running the upgrade.
fmohcine26 last edited by fmohcine26
currently I am on this version:
built on Thu May 10 15:02:52 CDT 2018
so, I should
1- make a backup
2- then uninstall the packages
3-reboot the system
4-is go to version 2.4.4
5-is the reinstallation of the backup package and the configuration of '' pfBlockerNG ''
did I understand the procedure
of the update
Yes that should be safe.