IPSEC Encryption Proposals dont change

  • I am trying to connect a PFsense with a draytek modem running pfsense 2.4.4.

    The issue I am seeing is not matter what I set the encryption algorithm in phase 1, PFsense wont change what it offers. It offers the below propsals. Is this a bug?

    12[CFG] <344> configured proposals: IKE:AES_CBC_128/AES_CBC_192/AES_CBC_256/CAMELLIA_CBC_128/CAMELLIA_CBC_192/CAMELLIA_CBC_256/3DES_CBC/HMAC_SHA2_256_128/HMAC_SHA2_384_192/HMAC_SHA2_512_256/HMAC_SHA1_96/AES_XCBC_96/AES_CMAC_96/PRF_HMAC_SHA2_256/PRF_HMAC_SHA2_384/PRF_HMAC_SHA2_512/PRF_AES128_XCBC/PRF_AES128_CMAC/PRF_HMAC_SHA1/ECP_256/ECP_384/ECP_521/ECP_256_BP/ECP_384_BP/ECP_512_BP/CURVE_25519/MODP_3072/MODP_4096/MODP_6144/MODP_8192/MODP_2048, IKE:AES_GCM_16_128/AES_GCM_16_192/AES_GCM_16_256/AES_GCM_12_128/AES_GCM_12_192/AES_GCM_12_256/AES_GCM_8_128/AES_GCM_8_192/AES_GCM_8_256/PRF_HMAC_SHA2_256/PRF_HMAC_SHA2_384/PRF_HMAC_SHA2_512/PRF_AES128_XCBC/PRF_AES128_CMAC/PRF_HMAC_SHA1/ECP_256/ECP_384/ECP_521/ECP_256_BP/ECP_384_BP/ECP_512_BP/CURVE_25519/MODP_3072/MODP_4096/MODP_6144/MODP_8192/MODP_2048

  • LAYER 8 Netgate

    Going to need far more information on that.

    No, it is likely not a bug.

    What other P1s do you have defined? How are they configured? What are the logs surrounding the single line you decided to post?

  • I found it configured the encryption settings properly for phase 1 when the configuration for phase 2 was done.

    Thanks for the follow up. The issue was just me not configuring the VPN properly.

Log in to reply