Scripting the behaviour of Status --> Interfaces --> DHCP renew button

jly2680 · Aug 8, 2019, 1:52 PM

[2.3.5-RELEASE][root@pfSense.local]/root: cu -l /dev/cuaU0.0
Connected

ERROR

^SETPORT:FF;10,12,16

OK

Issuing this AT^SETPORT=? command got an error answer from modem..here's the message after usbmodeswitch

[2.3.5-RELEASE][root@pfSense.local]/root: usb_modeswitch -J -v0x12d1 -p0x1506   Look for default devices ...
   product ID matched
 Found devices in default mode (1)
Access device 002 on bus 001
Get the current device configuration ...
Current configuration number is 1
Use interface number 0
 with class 255
Error: can't use storage command in MessageContent with interface 0; interface class is 255, expected 8. Abort

echo 'AT^NDISDUP=1,1,"jawalnet.com.sa"' > /dev/cuaU0.1

this modem command gave me a solid blue light on the modem,,but no ue0 or cde interface showed up..

bradtpt · Aug 8, 2019, 2:07 PM

The error from usbmodeswitch makes sense now I think about it, you have the stick firmware loaded so as such the device when inserted won't present as a mass storage device. I have an e3372 with the stick firmware loaded at work, if I get a chance tomorrow I'll fire up a machine with 2.3.5 and see if I can make it work. As I'm not familiar with your Alix hardware the closest I can go to replicating your environment would be to install an archived version of pfSense-CE-memstick-2.3.3-RELEASE-amd64.img I have here on an amd machine. Is your alix similar or a totally different platform?

jly2680 · Aug 8, 2019, 2:29 PM

@bradtpt said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

The error from usbmodeswitch makes sense now I think about it, you have the stick firmware loaded so as such the device when inserted won't present as a mass storage device. I have an e3372 with the stick firmware loaded at work, if I get a chance tomorrow I'll fire up a machine with 2.3.5 and see if I can make it work. As I'm not familiar with your Alix hardware the closest I can go to replicating your environment would be to install an archived version of pfSense-CE-memstick-2.3.3-RELEASE-amd64.img I have here on an amd machine. Is your alix similar or a totally different platform?

Oh thanks..its an old alix 2d13 i386..I think 2.3.5 doesnt work with 3372 in stick mode

bradtpt · Aug 8, 2019, 2:33 PM

Ahh ok, unfortunately netgate don't leave old versions online, I'll have to go digging and see if I can find a i386 installer kicking around somewhere. If you have a link or can dropbox it to me or similar let me know.
-edit- I just found this: https://mirrors.xmission.com/pfsense/downloads/pfSense-CE-2.3.5-RELEASE-i386.iso.gz and this: https://mirrors.xmission.com/pfsense/downloads/pfSense-CE-memstick-2.3.5-RELEASE-i386.img.gz so it looks like we're in luck.

stephenw10 · Aug 9, 2019, 1:34 PM

I would be surprised if there's any difference between the 32bit and 64bit versions as far as this modem is concerned. The available tools should be identical.

Steve

jly2680 · Aug 9, 2019, 1:47 PM

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

I would be surprised if there's any difference between the 32bit and 64bit versions as far as this modem is concerned. The available tools should be identical.

Steve

I test this modem through vm pfsense 2.4 , ue0 and cdc showed up..I wonder if there is any new patch from 2.4 if_cdce.ko that was not included in 2.3.5

can you look at this: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=192345

stephenw10 · Aug 9, 2019, 11:28 PM

There are many, many differences between FreeBSD 10.3 and 11.1 which is what you're comparing there.

That link is broken.

Steve

jly2680 · Aug 10, 2019, 3:39 PM

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

There are many, many differences between FreeBSD 10.3 and 11.1 which is what you're comparing there.

That link is broken.

Steve

the patch includes

head/sys/dev/usb/net/if_cdce.c
head/sys/dev/usb/serial/u3g.c
head/sys/dev/usb/serial/umodem.c

hope someone could port this patch on 2.3.5

stephenw10 · Aug 10, 2019, 4:04 PM

Your link was actually good, the bug server was down at that exact moment I tested.

Porting that is non trivial. You would have to rebuild a whole number of things there. You cannot just load a replacement module. And even after you had done that you would still be running unsupported, unpatched, 2.3.5.

Is there some reason you cannot just replace that ALIX with something vaguely current?

Steve

jly2680 · Aug 12, 2019, 4:41 PM

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

Your link was actually good, the bug server was down at that exact moment I tested.

Porting that is non trivial. You would have to rebuild a whole number of things there. You cannot just load a replacement module. And even after you had done that you would still be running unsupported, unpatched, 2.3.5.

Is there some reason you cannot just replace that ALIX with something vaguely current?

Steve

This alix will be deployed on our client’s remote area maybe this end of the month.I’ll convince him if he can rather buy a new hardware..I may use openwrt with this 4g stick if he refuse to shell out some $

stephenw10 · Aug 12, 2019, 6:36 PM

If you need to use the ALIX that is what I would do. At least you can have a current build on there that will be relatively secure.

Steve

jly2680 · Aug 12, 2019, 7:37 PM

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

If you need to use the ALIX that is what I would do. At least you can have a current build on there that will be relatively secure.

Steve

hmm can you please look at this,,upon setting this modem AT^SETPORT="FF;16,12,10" suddenly I have this in my log:

ugen1.2: <HUAWEIMOBILE> at usbus1
u3g0: <NCM Network Control Model> on usbus1
u3g0: Found 2 ports.

previously I dont have this log when I set this AT^SETPORT="FF;10,12,16" on my modem..But still no ue0 interface![alt text]

on my vm pf 2.4.4 :

stephenw10 · Aug 12, 2019, 8:07 PM

You probably still need the newer cdce driver.

Steve

jly2680 · Aug 12, 2019, 8:19 PM

@stephenw10
I compare 2.3.5 dev.d/usb.conf from 2.4.4 , my modem intsubclass and intproto is included on 2.4.4 usb conf and missing on 2.3.5 ..can I add this on my 2.3.5 usbconf??

nomatch 32 {
	match "bus" "uhub[0-9]+";
	match "mode" "host";
	match "vendor" "0x12d1";
	match "intclass" "0xff";
	match "intsubclass" "0x03";
	match "intprotocol" "0x16";
	action "kldload -n if_cdce";

stephenw10 · Aug 13, 2019, 8:45 AM

As a test I can't see why not. I've never tried that myself though...

jly2680 · Aug 13, 2019, 9:01 AM

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

As a test I can't see why not. I've never tried that myself though...

it didn’t work..I think there’s no ncm kernel module for 0x12d1 Sub=03 Prot=16..

--- /usr/src/sys/dev/usb/net/if_cdce.c	(revision 326479)
+++ /usr/src/sys/dev/usb/net/if_cdce.c	(working copy)
@@ -276,14 +276,13 @@
 	{USB_VPI(USB_VENDOR_SHARP, USB_PRODUCT_SHARP_SLC750, CDCE_FLAG_ZAURUS | CDCE_FLAG_NO_UNION)},
 
 	{USB_VENDOR(USB_VENDOR_HUAWEI), USB_IFACE_CLASS(UICLASS_VENDOR),
-		USB_IFACE_SUBCLASS(0x02), USB_IFACE_PROTOCOL(0x16),
-		USB_DRIVER_INFO(0)},
+		USB_IFACE_SUBCLASS(0x02), USB_IFACE_PROTOCOL(0x16)},
 	{USB_VENDOR(USB_VENDOR_HUAWEI), USB_IFACE_CLASS(UICLASS_VENDOR),
-		USB_IFACE_SUBCLASS(0x02), USB_IFACE_PROTOCOL(0x46),
-		USB_DRIVER_INFO(0)},
+		USB_IFACE_SUBCLASS(0x02), USB_IFACE_PROTOCOL(0x46)},
 	{USB_VENDOR(USB_VENDOR_HUAWEI), USB_IFACE_CLASS(UICLASS_VENDOR),
-		USB_IFACE_SUBCLASS(0x02), USB_IFACE_PROTOCOL(0x76),
-		USB_DRIVER_INFO(0)},
+		USB_IFACE_SUBCLASS(0x02), USB_IFACE_PROTOCOL(0x76)},
+	{USB_VENDOR(USB_VENDOR_HUAWEI), USB_IFACE_CLASS(UICLASS_VENDOR),
+		USB_IFACE_SUBCLASS(0x03), USB_IFACE_PROTOCOL(0x16)},

Is there any possibility I can recompile and patch this cdc driver?

stephenw10 · Aug 13, 2019, 10:59 AM

You can try it in a FreeBSD 10.3 box. I have done so with other drivers and loaded them as kernel modules.

I've never seen it done with a USB device though.

Steve

jly2680 · Aug 13, 2019, 11:11 AM

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

You can try it in a FreeBSD 10.3 box. I have done so with other drivers and loaded them as kernel modules.

I've never seen it done with a USB device though.

Steve

If you dont mind can you guide me , I already made an svn checkout on 10.3 , no idea how to apply the patch,and if I compile it succcessfully , I can donate a little some beers..

stephenw10 · Aug 14, 2019, 5:13 AM

Basically as I described here: https://forum.netgate.com/post/712896

But obviously not for urndis as was that case.

Steve

jly2680 · Aug 14, 2019, 5:13 AM

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

Basically as I described here: https://forum.netgate.com/post/712896

But obviously not for urndis as was that case.

Steve

I applied the patch and compiled it..test the driver on vm freebsd 10.3 and it was detected and ue0 interface came up..but when I use this driver on pfsense ,, still same issue .. Do I need more drivers to be copy to pfsense?