Multiple wan inter vlan routing
hi pfsense gurus,
please help me out here chiefs, i have multiple wan setup with load balancing and multiple vlan, my inter vlan traffic doesnt work anymore when i assign gateway to the load balance gateway in vlan interface rule, when i set the interface rule to default gateway it works like a charm (see below i'm pingging 192.168.30.3 from 192.168.100.99)
Tracing route to 192.168.30.3 over a maximum of 30 hops
1 <1 ms <1 ms <1 ms 192.168.120.1
2 <1 ms <1 ms <1 ms 192.168.100.1
3 <1 ms <1 ms <1 ms 192.168.30.3
when i set it to the load balance, it didnot go to the vlan gateway, an went straight to wan then it went confused
please help me out here
bepo last edited by
please share a screenshot of your firewall ruleset and nat rules.
i got nothing on nat rules chief
netblues last edited by
@kulaku on vlan 30 put a rule to exclude local traffic from load balance too.
found the cure, added rule on vlan100 to use default gateway if going to certain address or host. turns out the load balance gateway lets local traffic out right away, thanks to netblues for giving me the idea