load balancing Multi WAN problem
-
This post is deleted! -
Post your relevant rules
-
Firewall Rules ANY (source) ANY (Destination) gateway (gateway group name) this applied in all VLAN
-
So if you send all your traffic from vlans to gateway group, then why it should be able to reach your nas?
-
@netblues that my problem i set it by any any in firewall rules but when in load balance gateway it cannot reach my storage in VLAN 1. But when i set only in my default gateway under Vlan rules advanced its working. the only problem is when my gateway in firewall rules is my group gateway i cannot access my storage
-
@limuel If you are policy routing (which you are, for multiwan) then you also need to exclude local access from policy.
-
@netblues what kind of local access policy? Windows Firewall?
-
We are always talking about pf sense related policies here..
if Firewall Rules ANY (source) ANY (Destination) gateway (gateway group name) this applied in all VLAN
then packets from vlan will end to (gateway group name) and NOT your nas lan.
Please post your fw rules. -
@netblues here are my FW Rules :
So what rules should i create to access my NAS in different Vlan with load balancing gateway?
-
Where is policy for wan group?
-
@netblues for now i set WAN_IBIZ and WAN to any (source ) any (destination)