Sonos speakers and applications on different subnets (VLAN's)
-
@baf
Can you provide an image of the firewall rules ???I am stuck at this part .... and i cant seem to get this to work
-
Can anyone take a look at how i configured things .
I cant get the speakers to work outside of the VLAN in the Sonos app.
i am attaching the pictures of how i configured things.
-
jimp,
I just wanted to thanks for your efforts with PIMD. I'm able to use the Sonos app on a secure network with the speakers on a VLAN, after several years of trying on Unifi and Untangle. I'm a recent convert to pfSense, but spent a few days trying to make this work. The key action for me was to reboot pfSense after I set up PIMD.
I had created extensive Sonos UDP and TCP pass rules following advice on multiple threads. I had enabled Avahi, all to no avail. When I rebooted, things worked. I've disabled Avahi and disabled the firewall UDP and TCP pass rules I have on the Sonos network. I seem to be relying only on PIMD.
My settings are all default, other than bind to none on the General tab and enabling desired interfaces on the Interfaces Tab. Multiple groups are listed on the Status tab.
I wish I had rebooted several days ago.
-
Hi @stan,
Thanks for reporting your experience with this.
I have to replicate what you have done:From PIMD:
General - Default bind: Bind to None
Interfaces: I have added the 2 interfaces that should talk to each other. In my case LAN, where I have my trusted devices that can access all the other networks, and IOT, where I keep untrusted ones and their access it limite to internet only. For each one I have only selected Interface Binding = Always bind.
Then you haven't added anything else in "BSR Candidates", "RP Candidates" or "RP Addresses".
I haven't created any firewall rule as you have suggested.Unfortunately this setup is not working for me.
I initially setup the Sonos devices by connecting to the same WiFi network of IOT but now when I open the Sonos App on my iOS device, I see all grayed out and after few seconds it tells me that there is a problem connecting to the devices.I suspect that you have a different configuration somewhere than mine. Any suggestions?
-
Blasterspike, the setup described above worked for awhile, then didn't. I've re-configured to rely only on the firewall rules. I'm not relying on PIMD anymore; in fact, I've removed it from my system. I still do have Avahi running, but that's just to enable guests to access the Sonos speakers with their own Apple Music and Spotify applications.
I've created two port aliases, Sonos_TCP_Ports and Sonos_UDP_Ports. The firewall rules permit traffic from the subnet with Sonos speakers to the subnets from which I want access the speakers using those ports. I also have a rule on each of the subnets from which I want to access to the speakers to the subnet with the speakers using those ports. These rules also "Allow IP options" (Advanced Options in the rule).
My port aliases are probably overkill, since I added whatever I found in various comments, but haven't gone to the trouble to try to whittle down the ports to see when it stops working.
TCP ports: 80, 443, 445, 3400:3401, 3445, 3500, 4070, 4444, 1400, 1443, 7000, 8080, 5000:5001
UDP ports: 136:139, 1900:1901, 2869, 10243, 10280:10284, 5353, 6969, 3722, 319:320, 32000:60000
If you do this and it works and if you successfully whittle down the ports, I'd be interested to know what your reduced ports are.
-
This thread is amazing and helped me get Sonos working with my VLAN's and in the process I learned a bunch of stuff.
For anyone still struggling with this I will give a warning of something that I am not sure anyone has referenced in the hundreds of replies.
Make sure that the interface where the VLAN'S is also added to the "enabled" interfaces. So lets say your VLAN is igb1.70, then you must also include igb1 otherwise it won't work.
Hope that helps.
-
@dennypage I had to use pimd to get HEOS app working on Android. Without PIMD, the app used to hang when I used Music>AV Inputs. The input used to change, but the app used to give an error. This webpage says that multicast traffic is used for HEOS.
-
@trumee That webpage describes UPnP support, which is not required for local network HEOS use. UPnP is generally required for opening ports to allow use/control from outside the local network (WAN).
Avahi provides mDNS device discovery across local segments, which is all that is necessary for HEOS discovery. It's all point to point after discovery. Unfortunately, I can't speak to why you had an issue in your specific case.
-
This post is deleted! -
@pajinha I don't understand your statement. all my interfaces and vlans are enabled. is that what you mean?
-
He is saying you must also enable the VLAN parent interface in PIMD. I have no way of testing that though.
Steve
-
@stephenw10 ok, now that makes sense.
-
I've read almost the whole thread and now I'm unsure, if the effort is worth it.
Of course I like the idea of separating the clients from iot devices.But from a security POV, is it necessary to do that?
Is enabling broadcasting and multicasting over VLANS safer, than just putting Sonos and Clients in the same network with the right rules? -
It is safer. Is it necessary? Only you can decide that really.
It's not designed to work across subnets. I would guess the vast majority of Sonos users have one subnet with servers and clients on it and don't see issues.
The question is if some firmware update suddenly added all your smart speakers to a bot net what other things on your network would that expose? And what sort of risk is that?
Steve
-
@stephenw10
Thanks Stephe for the reply.I'm a little bit overwhelmed by the thread itself. I don't know which solution works. Whether it's PIMPD, Avahi or the UDP relay.
I think the relay looks promising, but isn't in the package manager yet: https://redmine.pfsense.org/issues/10818 Will this be a thing?@stephenw10 said in Sonos speakers and applications on different subnets (VLAN's):
Only you can decide that really
For myself, I'd be thrilled to work this out somehow. But sadly my company network has way bigger security holes to close :( I'll comeback to this thread, when I've time!
EDIT: I tried it with IGMP-Proxy, doesn't work
-
I can only speak for myself and I don't like IoT's that are closed source, be it cam's, Sonos, smart power plugs etc. I have no idea what so ever what they (can) do and how well there operating system is maintained. As an example I have video door cam that has a telnet service running, no idea why this should be and why telnet is chosen and not SSH.
It's like your home, some use a burglar alarm system others only have lock, so each to his own ;)
-
I totaly agree. To be honest, I wish I could trust some companies to do their homework. I can't and don't want to control everything by myself.
-
That's why I like and use pfSense, I want to control the rulez, so what do you (dis)allow to go where. That's why by default every subnet (apart from the LAN) created can go nowhere.
Although a cheap router/fw (albeit from you supermarket) has good ingress block, you have almost no control over the traffic. In pfSense I decide what goes where.
-
@wellcomefit
For what it's worth, I've given up. I've solved the problem three times. Each time it worked for a few months, then stopped working with that solution. I didn't want to devote more time and effort.
I have a Sonos subnet. I've moved my smartphones to that and created rules for their access to other nets where needed. Not much is needed. Access to a NAS from smartphones for storage of pictures and access from the Sonos speakers to the NAS (limited to TCP port 445) for the music library. I use a firewall on the NAS and ACL on the NAS to control what the smartphones can get to.
It's also easy to switch the smartphones to my main data network when I want to get to other things. But I haven't had that need. This is a home environment, not a business environment, so your situation may be more complicated. -
Thank you Stan for the feedback.
I decided for myself that, it's not worth the effort right now. UDP_Relay sounds really promising and if this ever comes officially to Pfsense. I'm willing to give it a try :) Until then, I'll go with your solution and just create a separate VLAN for it and not connect the client and sonos network.