dns resolver - unbound

[doblezero]

After I upgraded to 2.4.3 unbound stopped working. I've upgraded to 2.4.4 since but the issue persists.

Version 2.4.4-RELEASE-p2 (arm)
built on Wed Dec 12 14:40:29 EST 2018
FreeBSD 11.2-RELEASE-p6

When i try and start unbound the following happens.
The following input errors were detected:

The generated config file cannot be parsed by unbound. Please correct the following errors:
/usr/local/lib/libpython2.7.so.1: unsupported file layout

Below are the involved library files.
/usr/local/lib: ls -lah|grep python
-rw-r--r-- 1 root wheel 54K Oct 3 06:03 .libpython2.7.so.1-gdb.py.pR2774s34cMN
-rw-r--r-- 1 root wheel 1.6M Oct 3 06:02 .libpython2.7.so.1.RCQFTgPFRLn6
lrwxr-xr-x 1 root wheel 17B Oct 3 06:02 .libpython2.7.so.tYm3wvvdOyvF -> libpython2.7.so.1
lrwxr-xr-x 1 root wheel 17B Jan 12 14:30 libpython2.7.so -> libpython2.7.so.1
-rw-r--r-- 1 root wheel 1.8M Jan 12 14:19 libpython2.7.so.1
-rw-r--r-- 1 root wheel 54K Jan 12 14:19 libpython2.7.so.1-gdb.py
drwxr-xr-x 28 root wheel 36K Dec 5 20:14 python2.7

The corresponding configuration files
/var/unbound: ls -lah
total 56
drwxr-xr-x 4 unbound unbound 512B Jan 12 15:56 .
drwxr-xr-x 26 root wheel 512B Dec 12 14:42 ..
-rw-r--r-- 1 root unbound 177B Jan 12 15:33 access_lists.conf
drwxr-xr-x 2 unbound unbound 512B Dec 12 14:42 conf.d
-rw-r--r-- 1 root unbound 0B Jan 12 15:34 dhcpleases_entries.conf
-rw-r--r-- 1 root unbound 0B Jan 12 15:33 domainoverrides.conf
-rw-r--r-- 1 root unbound 398B Jan 12 15:34 host_entries.conf
-rw-r--r-- 1 root unbound 300B Dec 12 2017 remotecontrol.conf
-rw-r--r-- 1 unbound unbound 1.2K Dec 5 08:33 root.key
-rw-r--r-- 1 unbound unbound 1.2K Apr 23 2018 root.key.14680-0
drwxr-xr-x 2 unbound unbound 512B Jan 12 15:57 test
-rw-r--r-- 1 root unbound 1.8K Jan 12 15:33 unbound.conf
-rw-r----- 1 unbound unbound 2.4K Dec 12 2017 unbound_control.key
-rw-r----- 1 unbound unbound 1.3K Dec 12 2017 unbound_control.pem
-rw-r----- 1 unbound unbound 2.4K Dec 12 2017 unbound_server.key
-rw-r----- 1 unbound unbound 1.3K Dec 12 2017 unbound_server.pem

Is there any way to get unbound working again.

Thanks,

[RonpfS]

@doblezero said in dns resolver - unbound:

what is the content of unbound.conf ?

[doblezero]

Thanks for the reply. The unbound.conf file contents is attached.
0_1547331973379_unbound.txt

[Gertjan]

@doblezero said in dns resolver - unbound:

-rw-r--r-- 1 root wheel 54K Oct 3 06:03 .libpython2.7.so.1-gdb.py.pR2774s34cMN
-rw-r--r-- 1 root wheel 1.6M Oct 3 06:02 .libpython2.7.so.1.RCQFTgPFRLn6
lrwxr-xr-x 1 root wheel 17B Oct 3 06:02 .libpython2.7.so.tYm3wvvdOyvF -> libpython2.7.so.1

Looks no good to me.

It should be

[2.4.4-RELEASE][admin@pfsense.brit-hotel-fumel.net]/usr/local/lib: ls -lah | grep python
lrwxr-xr-x   1 root  wheel    17B Sep  5 01:54 libpython2.7.so -> libpython2.7.so.1
-rw-r--r--   1 root  wheel   1.8M Sep  5 01:54 libpython2.7.so.1
-rw-r--r--   1 root  wheel    54K Sep  5 01:56 libpython2.7.so.1-gdb.py
drwxr-xr-x  28 root  wheel    36K Sep 21 14:57 python2.7

Re install.

[doblezero]

Thanks for the reply Gertjan.

I'm guessing the ".libpython2.7.so.1-gdb.py.pR2774s34cMN, .libpython2.7.so.1.RCQFTgPFRLn6, and .libpython2.7.so.tYm3wvvdOyvF -> libpython2.7.so.1" files are remains from the 2.4.2 to 2.4.3 upgrade that led to the loss of unbound functionality.

My unit is a Netgate SG-1000. I was really trying to avoid re-flashing to get full functionality back.

I'll attempt to reinstall once I get an OTG cable and report back.

[doblezero]

Good Evening,

It took me a long time to get around to this, but I've finally re-flashed my SG-1000 in hopes of getting unbound to work. Unfortunately the process was unsuccessful. As I understand it, unbound is built into the firmware itself. Since a reflash did not address the issue, what other solutions can I attempt?

Thank you,

[doblezero]

My apologies. The image reinstall did resolve the issue. I forgot that as a work around for unbound not working, I installed dnsmasq. I forgot to turn off dnsmasq before starting unbound. Thanks for listening.