(SOLVED)no dhcp on the lan !!!
-
@major501
if you manually assign the ubuntu server ip address with the default gateway 192.168.12.1, will it be able to ping 192.168.12.1 ? for example, 192.168.12.2 -
https://i.imgur.com/hBoz6zu.png
i want to automatic assign ip with pfsense -
Well it shows dhcp server running... So if your client is not getting dhcp - more than likely its not on the correct network via your VM setup..
Does the dhcp service pfsense show any discover in the logs? Does it show its trying to had out an offer?
The point of setting static on the machines was to actually validate you have connectivity to pfsense where the dhcp server is running.
-
show the output of the command ifconfig -m
the picture shows
that interface em1 is down -
I do not understand why the wan has a dhcp despite all my setting I would like the dhcp on the lan
here is the output of the command ifconfig -m em1
-
Your EM1 is not up - status = NO CARRIER. kind of hard for anything to talk to it when its not online. Or get a dhcp from it.
Did you setup your VM settings to enable that nic on power up?
-
thank you for your answer i rule my problem with virtualbox i can make internet networks and on the configuration panel the 2 cards are in green c is vmware-workstation which refuses to connect the card to the internal lan
-
Not sure what your issue is, but I have run pfsense on pretty much every VM solution out there and not had any issues. VirtualBox, Vmware Workstation, Vmware sphere/esxi, Hyper-V, etc.
All I can tell you if pfsense doesn't see the interface up - then no its not going to be able to do anything with that nic.
-
it is a problem with vmware i am on fedora and vmware do not want to connect my network cards in lan internet but with virtualbox i optiend my ip address automatically
-
-
And what does the log say? Did you actually enable the nic to be on in vmware? It looks like you have it enabled in your previous pic.. So what does the log say?
Lets see your lan segments tab.. Did you configure those - do you have any other vms on this lan segment? Did you actually create a lan segment for vms to connect to? What version of workstation are you running?
-
i reinstall vmware workstation and now all work i can ping on internet Lan segment