L2TP - IPsec - blocked communication - Interface NG0

[cigu]

Hello,

I have compiled the L2TP channel as long as the users are dialing, there is no communication with either the world or the internal network (the gateway is set up on a remote network)
In the firewall, you can see the connection attempt with the NG0 interface, but when I would like to do the rules from this entry in the firewall gets the wrong Interface response.

I am asking for a hint where the problem may lie.

[Konstanti]

@cigu

Hey
Look here, section L2tp rules

https://docs.netgate.com/pfsense/en/latest/vpn/ipsec/l2tp-ipsec.html

[cigu]

Hello,
Thakns for reply. I set L2tP with this manual but i have to miss something.
I have access to LAN but still no access to internet.

LAN : 192.168.210.0/24

All l2tp client are from 192.168.100.128/25 subnet

Below created rules

1. Floating
   
2. Outbound
   
   3.IPsec
   
   4.L2TP
   

[Konstanti]

@cigu Nat outbound on Wan interface for l2tp client? Change interface to Wan on the second picture

[cigu]

Thanks Konstanti. I reload Outband and start to working.

Thanks a lot!