Does anyone have a link to a good site for Multi WAN
-
The .32 is assigned to the Router of the office I am not sure what kind. We can not configured it.
And I why the L3 switch because he has an L3 switch and I thought I needed it but I can just use a L2 switch.
Also I am working on making a better network topology. -
I have a L3 switch, its not like they are crazy enterprise hardware.. But when you call them out on a drawing as L3.. Points to them actually being used as L3 and routing.
If you call out switch, its assumed L2, if you state L3 its normally used to point out that your routing at the switch.
You do understand an L3 can both do L3 and L2 at the same time, etc.
So the router is Providers Router.. From your drawing that 32/27 is routed to you.. Where does it get natted, at the 3com L3 or are your HV1 and HV2, etc. have public IPs in that 32/27 network.
So contact the provider and have them change the router so that you can route that /27 to downstream pfsense you want to put in. What is the make and model of the device - take a picture of its model number, etc.
-
I think it gets natted on HV1 and HV2 there going 4 wan cable's in every hyper-visor.
-
And your sure HV1 actually has public IPs on it... Then get with the provider so you can put pfsense behind their device. Then you can put this /27 behind pfsense.
Your other option would be to use pfsense as Bridge firewall vs routed, etc. If what you want to do is put this /27 directly on your HV boxes..
So currently those HV boxes are just directly exposed to public internet - there is no firewall in front of them that you control? Does the ISP box filter any traffic? Also you sure that is actually a "router" maybe its just bridging that /27..
-
@johnpoz said in Does anyone have a link to a good site for Multi WAN:
osed to public inter
Sorry I think it is just a bridge and on the HV1 and HV2 is untangle running as firewall if I remember correct.
