Need your help, give me guide or step by step how to do it
-
Interface
• WAN1 192.168.1.1
• WAN2 192.168.254.254
• LAN 10.0.0.100
• Opt1 “ELATIX server 1” same network address to local ip 192.168.1.122
• Opt2 “elastix server 2” same network address to local ip 192.168.2.122PFSENSE FIREWALL CONFIGURATION.
Interface
Opt1 “elastix server 1- allow server 1, and other block server 2 and 3
Opt2 “elastix server 2 - allow server 2, block server 1 & 3
- allow server 1, and other block server 2 and 3
-
I'm not sure there is a question here.
-
Yeah not getting what your asking for here.. And unless you have something more than /24 your op1 and wan1 overlap?
-
Every post Mark has made is all about 'I want to do something. Can someone tell me all the steps?" This was posted yesterday and he basically reposted it today with far less context:
https://forum.netgate.com/topic/141281/how-to-config-nat-interface-for-external-ips
Mark, people will help you but they will not do your job for you from start to finish. What have you already done? Where are you getting stuck?
-
Here is a simple step by step on how to get your network running:
- Step 1: Hire a professional admin.
- Step 2: Explain to him what you want in as much detail as possible.
- Step 3: Keep the admin under contract and pay him on time.
- Step 4: Enjoy a working network setup.