Single board computer support
-
Which SBC supports pfsense? According to the forum SG-1100 is based on ESPRESSOBIN. So will it work on ESPRESSOBIN or SG-1100 is a customized ESPRESSOBIN
-
@dibun You asked this already and don't seem to read the posts anyway but here are your infos (again):
https://forum.netgate.com/topic/141230/need-to-purchase-a-sg1100-netgate-is-out-of-stock/8#Most devices running pfSense are SBCs so be more specific in what you need.
An Espresso.bin won't. -
Sorry about that. I am trying to find out which x86 SBC will support pfsense. Ofcourse the SBC should also support BSD before pfsense can work. I googled a lot but can't find any answers.
Thanks for your response
-
@dibun said in Single board computer support:
...which x86 SBC will support pfsense.
None.
There are only x64 install images available, support for 32-bit hardware has ended. -
Any recommended x64 SBC?
-
A closer definition is needed. How many ports? What sort of bandwidth? Just the board?
As an aside I would include x86-64 in the broad term x86. If not then is a 286 x86?
Steve
-
These are still OK: (Cheap, small, reliable)
https://pcengines.ch/apu2.htmand they support x64 - which is where you need to be looking.
As Steve said: What Specs do you need?
-
I am looking for dual gigabit port and the minimal support needed to run pfsense. It will be used for home use.
-
And throughput? VPNs? Packages?
