Floating rules Not working with squid installed

waldopulanco

Hi! I started to configure it since 3 days ago but till now I cant manage to work. I have 20mbps internet speed. I want to separate browsing and gaming, I have only one WAN and one LAN. I want to limit my browsing to 5mbps, and the rest of my internet speed is for gaming like dota2, Lol, ROS etc. I want to limit browsing without affecting the speed of squid cache, So I created my rules on Floating rules instead on LAN rules because I do not want to limit the cache on squid. On floating rules my setting is

Action: pass
Interface: WAN
Direction: out
Address Family: IPv4
Protocol: TCP
Source: WAN net
Destination: any
Destination Port Range: aliasPort80-443-8080
Gateway: WAN
In / Out pipe: WAN_Up_byHost - WAN_Down_byHost

pfsense version: 2.3.3
squid version: 3.5.26
squidGuard version: 1.16.4

In transparent mode enable and the floating rules enabled browser is working but on the games like garena LOL I can Login but cant get to Lol interface. but when I disabled the my rule on foating rules it works, but the browsing has no limit.

I disabled Transparent mode, and set the proxy on my computer client and enabled the rules on floating rules, the browsing is working but in some games, can't get to work like above. but when I disabled my rule on floating rules its working even in browsing and games but the browsing has no limit.

on my Firewall / Traffic Shaper / Limiters
Name: WAN_Down
Bandwidth: 5mbps
Mask: none

On WAN_Down queue
Name: WAN_Down_byHost
Mask: Destination addresses

Name: WAN_Up
Bandwidth: 3mbps
Mask: none

On WAN_Up queue
Name: WAN_Up_byHost
Mask: Source Addresses

thanks in advance!

Grimson

@waldopulanco said in Floating rules Not working with squid installed:

pfsense version: 2.3.3

Don't use an old and unsupported EOL version. Update to 2.4.4p2 and then come back with details about your setup in screenshots.

waldopulanco

I don't know if 2.4.4 is compatible in Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz, 2gb ram and 500gb storage.

waldopulanco

I followed this tutorial https://forum.netgate.com/topic/107276/howto-multi-wan-traffic-shaper-with-bandwidth-limits-per-interface/2 to limit the bandwidth and its working on download, the problem is the upload I can't limit the upload. I don't know where do I limit the upload if I create on LAN subqueue or WAN subqueue. I manually created my queue in Firewall / Traffic Shaper / By Interface. Anyone how do I limit the upload? can you give me some sample? thanks in advance!

waldopulanco

can't limit the upload. only working is download.

found the tutorial here https://forum.netgate.com/topic/107276/howto-multi-wan-traffic-shaper-with-bandwidth-limits-per-interface