Configure 3 lan in pfsense
-
Ok, well if that's your blocked clients list do you have group ACLs for each subnet? That;s just one subnet listed there so it would not catch traffic from the other interfaces.
Is that one you have shown working?
Steve
-
@stephenw10 Ok, well if that's your block clients list do you have group ACLs for each subnet? R: Yes, for each one
Is that one you have shown working? R: Yes it is the one that works well
So how could I do it so that if I accept the block list? :O -
I don't understand the question.
If traffic from the other subnets is not being filtered then it is probably not matching the group ACLs for those interfaces. Check they are correct.
Steve
-
@stephenw10 my question was because it does not block correctly if I have already configured the squidguard?
Yes I have already checked and everything corresponds to each group in each list ! :O -
Ok can we see shots of that to check?
It is either not matching the group ACLs or those ACLs are not set to the correct target rules.
Or it could not be going through Squid at all but you have said that traffic appears in the Squid logs.
Steve
-
@stephenw10 My configuration
-
Ok, which of those is in Blacklist2 that should be being blocked?
And I assume it is not in conexionpf?
It should be blocked because 'Do not allow IPs' is checked?
Steve
-
@stephenw10 Ok, which of those is in Blacklist2 that should be being blocked? R = blocked domains for the support area
And I assume it is not in conexionpf? R = Is the ip of the pfsense to ensure connection to internet
It should be blocked because 'Do not allow IPs' is checked?
R = Then I disable this option, I understood that it was so they could not place the ip
¨Do not allow IP-Addresses in URL
To make sure that people do not bypass the URL filter by simply using the IP-Addresses instead of the FQDN you can check this option. This option has no effect on the whitelist¨. in common ACL -
That option is to stop people using the IP directly.
I was asking if you expected that traffic to be blocked because the only thing I see in the log is the pfSense webgui at 172.54.54.254 and mozilla.org. I assume both of those should be passed?Incidentally 172.54.54.X is public IP space, it belongs to t-mobile. You should be using a private address there.
Steve
-
@stephenw10 Yes, mark the traffic and the ip is from my proxy jejejje
-
@stephenw10 said in Configure 3 lan in pfsense:
172.54.54.X is public IP space, it belongs to t-mobile.
You can not just use public space internally and not expect to run into problems at some point..
There is plenty of rfc1918 to use.. 172.16-31.x.x is open for you to use..
-
Ok, which of those URLs should be blocked?
It looks like facebook is being denied there. Is that in Blacklist2?Steve
-
@johnpoz :o
-
@stephenw10 Facebook I block it in general in squid and I want to block the blacklist 2
-
You blocked facebook where?
-
@stephenw10 In squid to see if it blocks me in a general way
-
Yes. I mean where exactly did you make that setting?
-
@stephenw10 Thank you very much already resolved. !! But now I have problems with squid because when I activate it, I do not load the google page and others like yahoo. What could this error be caused? :/
-
So what was the problem?
What error do you see now when you turn on Squid? In the browser? In the squid log?
Steve
-
@stephenw10 I already solved it thanks !!! :D
