Athp driver

kiokoman

not anymore, I have virtualized everything on ESXi and added a Ubiquiti ap-ac-pro, for me it was too unstable.
but I have modules compiled for FreeBSD 12.1 if you want to try
https://drive.google.com/drive/folders/1fM-Jlmf8BY21kIEGueSxFWmrISZqcDj3
there is a folder athp-12.1

kiokoman

nice

Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")

Co-authored-by: Bjoern A. Zeeb bz@FreeBSD.ORG.

we had to wait for netgate to chime in before something get done

thumb up for netgate and bzfbd

but idk when we can take advantage of the patches, that drivers are intended to be built against FreeBSD 13

maybe with pfsense 2.6 ?

stephenw10

Ooo, nice I'll give them a go.
It's weird I'm seeing that firmware table full error that others reported before. It's been so long since I set this up initially I've forgotten exactly how I got past it. The notes I made that seemed sufficient at the time suddenly look woefully inadequate!

Steve

stephenw10

Looks like current snaps are loading more firmware by default. Standby....

stephenw10

And we're back...
Firmware limit removed in current snaps.

Steve

kiokoman

ah it was #define FIRMWARE_MAX right?

stephenw10

Yup. https://github.com/freebsd/freebsd/commit/7dfd7b3b1a033dac9d594cdec23d2f82b84fa39d

Gektor

@kiokoman
Can you add, please, firmware (with board-2.bin) for QCA9984/hw1.0 on FreeBSD 12.1?

stephenw10

I'm not sure that is supported at all yet. What's the PCI-ID?

https://github.com/erikarn/athp/blob/master/otus/freebsd/src/sys/dev/athp/if_athp_pci.c#L126

Steve

Gektor

@stephenw10
0x168c 0x0046 0x168c 0xcafe 0 0 "Qualcomm Atheros" "QCA9984"

stephenw10

Yeah not in the code so the driver would not attach to that yet.

_rp

Hey, I also have a Compex WLE600VX card installed in my pFsense with 2.5.0 Dev installed, the card I understand is a Qualcomm Atheros QCA9882 based card. I'm running the latest snapshot from yesterday.

Can anyone summarise what I need to do to make use of this card please, it's currently not showing in the device list in the GUI.

Gertjan

@romprod said in Athp driver:

it's currently not showing in the device list in the GUI.

GUI ?
The dialogue from @kiokoman and @stephenw10 above is "command line world only". Wifi na and ac settings in the GUI, that silence fiction right now.
Be ready to compile your own device drivers etc .
IMHO, it implies also far more knowledge then just typing 'make' in the top of a source tree.
It's also "2.5.0" ....

_rp

I'm born ready!

kiokoman

you need to build the driver, there are instructions here
https://github.com/Geramy/athp
2.5.0 is now freebsd 12.2 so you need to download freebsd 12.2 and compile the driver.
you can't compile inside pfsense so you need a virtual machine or something to do the work.
after that upload stuff to /boot/kernel/
cross your fingers and hope it works,if it work and the driver attach you can configure it using the gui

last time i checked

you need to

git clone https://github.com/Geramy/athp/tree/NEW_ATHP_ARVIF_LOCK

and not the one from erikarn, it does not build on freebsd12 but only on freebsd13

stephenw10

Yeah, I had significant difficulty getting that compiled. I think I was probably using the wrong branch for most of that time!

Steve

Gektor

AC support on FreeBSD is terrible, almost not support at all. Make virtualization (like Xen, Proxmox and etc), than setup pfSense + OpenWrt and you will get fully support of WiFi with pfSense.

stephenw10

Yes, currently that's true. This thread is referencing the efforts to fix that though.

_rp

I'm having issues while compiling this for 12.2 for some reason. I'm using Geramys build as suggested above but that doesn't seem to compile correctly, maybe something that I'm doing wrong potentially.

Does anyone have the files already that they can share for 12.2?

Ive tried the files for 12.1 but they seem to crash the OS when I try to change any of the wlan settings etc.

_rp

git clone -b NEW_ATHP_ARVIF_LOCK https://github.com/Geramy/athp.git
cd /usr/src
make -j12 kernel-toolchain
make -j12 kernel
make -j12 buildkernel KERNCONF=GENERIC
make -j12 installkernel KERNCONF=GENERIC
cd /root/athp/otus/freebsd/src/sys/modules/
./build_modules

root@freebsd:/usr/src # cd /root/athp/otus/freebsd/src/sys/modules/
root@freebsd:~/athp/otus/freebsd/src/sys/modules # ./build_modules
entering athp
Warning: Object directory not changed from original /root/athp/otus/freebsd/src/sys/modules/athp

/root/athp/otus/freebsd/src/sys/modules/athp/../../dev/athp/athp_idr.c:521:34: error: result of '2^30' is 28; did you mean '1 << 30' (1073741824)? [-Werror,-Wxor-used-as-pow]
        int max = end > 0 ? end - 1 : (2^30);   /* XXX */
                                       ~^~~
                                       1 << 30
/root/athp/otus/freebsd/src/sys/modules/athp/../../dev/athp/athp_idr.c:521:34: note: replace expression with '0x2 ^ 30' to silence this warning
1 error generated.
*** Error code 1

Stop.
make: stopped in /root/athp/otus/freebsd/src/sys/modules/athp