Setting up Milti static IPs
-
Hello all,
I'm new to PF sense and meed a little help. I'm in Iraq (military contractor) and I run 2 VSAT terminals with around 20 PCs on both networks through different ISPs with 30 IP adresses assigned to each account. The 1st system is running a linkstar modem with a switch connecting all the PCs to the network and all the PCs must have the IP addresses entered in manully in order for their PC to connect to the internet (IP address assigned to that PC, Subnet mask, Default gateway, prefferred server and Alternate DNS server) The 2nd system is running a Hughes 7000 modem connected to a stand along CPU server (running PF sense software) connected to a couple of switches connecting all the PCs to the network and only requires the PCs to be set to obtain the IP address automatically. What I need to do is set the 2nd network to work like the 1st (where each PC is required to enter the info manully). Is there a way to do this in the PF sense software? If so I would sure appreciate any help I can get. If there are instuction to do this they can be sent straight to me via email - ishurelds@hotmail.com ….Thanks in advance