Upgraded to 2.4.4_3 - after 2 days router not working anymore.
-
@jimp said in Upgraded to 2.4.4_3 - after 2 days router not working anymore.:
if your update URL is set to track snapshots
Ah, my bad. I understood that the OP wanted to install the latest stable = 2.4.4-p3, not de dev version (future 2.5.0).
-
That appears to be the original intent, but somewhere along the way they had to have set it to track snapshots.
-
Which would explain the broken update (path) and problems with PHP and library versions
-
it could be because i remember sometimes, i change the update url to the latest development 2.5 just to check the version?
Never installed it though -
@albgen said in Upgraded to 2.4.4_3 - after 2 days router not working anymore.:
change the update url to the latest development 2.5
Switching it to 2.5, and back again to the latest stable version doesn't do nothing.
As you said, as long as you didin't actually "upgrade" using on "2.5.0". -
@Gertjan 100% i did not tried a non stable version.
Ok guys i hope it was useful. Going to deler these images... -
Would it be possible that you installed or updated a package or anything while you were switched to 2.5? Could have happened that way.
-
@JeGr ehm..no, i dont think i have done such steps
-
@albgen i'm quoting myself because today the router is dead again with the php errors and i'm on 2.4.4_2
Well, the problem is i think with the upgrade ui. Yesterday i just switched to development branch without installing. Only this and the router after the reboot is dead. -
?
I did not click on Confirm - I just switch back to 2.4.4_3. => Nothing happened.
Re install (again), do not import your config, just make your WAN work, and upgrade to 2.4.4_3 direct.
Check that everything works (DNS, etc).
Then import your config.edit : you said "dead" : == dead on the console (or VGA) access ?
Any logs available ? -
@Gertjan dead like this
so only the shell option was working...basically the same issue as the begining
