Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Upgraded from 2.4.3.? to 2.4.4p2 (now p3) sporadic loss of network WAN

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    2 Posts 2 Posters 524 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • R
      rbuckland
      last edited by

      Hi,

      I have just updated the 2.4.4p2 to 2.4.4p3. (in hope that my problem disappears).

      My issues started, right after I upfraded from 2.4.3 to 2.4.4. I ran 2.4.3 stable with no issues; better part of 12 months.
      I have pinned down the failure, to something in 2.4.4.

      Setup
      PFSense Physical box (Laptop) - Dell
      Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz - 8G RAM
      128GB SSD
      Physical NIC to Cisco Switch (LAN side)
      USB NIC to Cable Model in Bridge Mode - DHCP (WAN - Optus Aussie Provider)

      Issue
      Every so often (1 hour, 1 day, it varies) - the WAN side drops off. only DNS resolves (pn pfsense
      SSH into the pfsense, command line and {dig www.google.com} still works, but no connectivity.
      If I reboot pfSense, it all comes good again - and the "wait continues" until it fails again.

      I also noticed, if I switch off the Cable modem .. and switch back on again, that too resets the "fault"
      (but that is a walk downstairs to the "comms" room :-) )

      The WAN side always shows as up "green arrow", on the status page.
      I set the monitoring, of the WAN gateway to ping 8.8.8.8 - but the ping always works also :-(

      Question
      What do I look for to find out what it is that is failing ? how do I begin to debug this ?
      Something has changed since 2.4.3 .. and yes I noticed a loft of dhclient issues (https://redmine.pfsense.org/issues/8507)

      My current plan
      0. add in some extra monitoring somewhere ..
      1. see if the upgrade to 2.4.4p3 fixes it (upgraded - good for the past 30 minutes)
      2. rollback to 2.4.3<something> if it doesn't
      3. roll-forward to 2.5.?

      Could I have some suggestions please ?

      1 Reply Last reply Reply Quote 0
      • JeGrJ
        JeGr LAYER 8 Moderator
        last edited by

        @rbuckland said in Upgraded from 2.4.3.? to 2.4.4p2 (now p3) sporadic loss of network WAN:

        1. add in some extra monitoring somewhere ..

        That for sure. I'd go and set up a small VM or server/raspi/whatever to not only ping an external source but also add 2-3 other checks as in Ping, DNS, File get / File Put (via sftp for example)
        Also check if your cable modem has a status site you can call.

        That's some strange error, that would let out ping and dns but nothing else.

        Don't forget to upvote 👍 those who kindly offered their time and brainpower to help you!

        If you're interested, I'm available to discuss details of German-speaking paid support (for companies) if needed.

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.