(SOLVED) Suricata Interfaces have to be manually Restarted
-
@bmeeks said in Suricata Interfaces have to be manually Restarted:
@Raffi_ said in Suricata Interfaces have to be manually Restarted:
Thanks for the help Bill. I'll keep any eye out for an update on this. In the meantime, I'll try uninstalling and installing again just for the sake of being persistent. If anything changes on my end I'll let you know.
I doubt that will make any difference so long as it still downloads and installs the same binary. It really looks like to me that the binary built as suricata-4.1.4_2 is not "really" my new 4.1.4_2. It appears to still have the old version of my custom blocking plugin patch. That's the only way I can explain the "tree is null" error. I very explicitly fixed that error ...
.Yup, uninstall and install of 4.1.4_4 gave me the same md5 results as before.
-
the update appeared to me now on my pf 2.5
[2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: md5 -q /usr/local/bin/suricata
cc5200e8369def9268b9e30c0c3f41c6 -
I am seeing odd behavior, Suricata was running fine for awhile but when I got home from work around 6 I noticed the WAN instance had stopped, when I restarted it I lost all internet connectivity on all the devices on my network, once I stopped it everything immediately worked again, wondering if this is related to these bugs.
-
@bose301s said in Suricata Interfaces have to be manually Restarted:
I am seeing odd behavior, Suricata was running fine for awhile but when I got home from work around 6 I noticed the WAN instance had stopped, when I restarted it I lost all internet connectivity on all the devices on my network, once I stopped it everything immediately worked again, wondering if this is related to these bugs.
Yes, if you actually still have the non-patched binary running it will cause a crash. As I just posted in another thread, something unusual happened during the posting of the update and the new binary was actually missing my bug fix. You should get the MD5 hash I posted up above (and the same one user @kiokoman just posted about for pfSense-2.5.
-
@bmeeks OK, I got the same md5 as Raffi, should I reinstall, I already tried that but obviously didn't work as I still get the wrong md5. I don't want to go to 2.5 devel, I am on 2.4.4 p3.
-
Just sit tight and try again tomorrow. I reported the issue to the pfSense developer who posts my Snort and Suricata packages to the repository. Since the new file showed up in pfSense-2.5 DEVEL a couple of hours ago, I suspect the correct file will get posted to 2.4.4 RELEASE pretty soon.
-
Is this problem with no blocking and/or having to manually restart Suricata still occurring? I have been unable to reproduce this, and I've tried in both a 2.4.4 RELEASE virtual machine and a 2.5 DEVEL virtual machine. The blocking module now correctly senses and registers firewall interface IP changes without generating a "tree is null" error and without those invalid kernel IP message errors.
The MD5 hash values for the Suricata binary are different for pfSense 2.4.4 versus 2.5. This is due to the differences in the compiling libraries, but both versions do contain my fix for the problems above.
-
@bmeeks said in Suricata Interfaces have to be manually Restarted:
Is this problem with no blocking and/or having to manually restart Suricata still occurring? I have been unable to reproduce this, and I've tried in both a 2.4.4 RELEASE virtual machine and a 2.5 DEVEL virtual machine. The blocking module now correctly senses and registers firewall interface IP changes without generating a "tree is null" error and without those invalid kernel IP message errors.
The MD5 hash values for the Suricata binary are different for pfSense 2.4.4 versus 2.5. This is due to the differences in the compiling libraries, but both versions do contain my fix for the problems above.
Hi @bmeeks, unfortunately the problem is still around for me. I tried uninstall and reinstall this morning to see if anything changed, but the md5 is still the incorrect one I posted before. The behavior is still the same as well. I even tried to un/reinstall just before posting this to be sure nothing has changed since earlier this morning. The md5 is still not correct for me.
-
@Raffi_ said in Suricata Interfaces have to be manually Restarted:
@bmeeks said in Suricata Interfaces have to be manually Restarted:
Is this problem with no blocking and/or having to manually restart Suricata still occurring? I have been unable to reproduce this, and I've tried in both a 2.4.4 RELEASE virtual machine and a 2.5 DEVEL virtual machine. The blocking module now correctly senses and registers firewall interface IP changes without generating a "tree is null" error and without those invalid kernel IP message errors.
The MD5 hash values for the Suricata binary are different for pfSense 2.4.4 versus 2.5. This is due to the differences in the compiling libraries, but both versions do contain my fix for the problems above.
Hi @bmeeks, unfortunately the problem is still around for me. I tried uninstall and reinstall this morning to see if anything changed, but the md5 is still the incorrect one I posted before. The behavior is still the same as well. I even tried to un/reinstall just before posting this to be sure nothing has changed since earlier this morning. The md5 is still not correct for me.
The MD5 hash you posted last Friday (the one ending in fac7) is the same one I have on my 2.4.4 virtual machine, and that's the version I can't see the problem with. So we need to determine what is different between your setup and my virtual machine.
For starters, is your WAN IP a PPPoE interface or is it a DHCP or static IP setup?
-
@bmeeks said in Suricata Interfaces have to be manually Restarted:
@Raffi_ said in Suricata Interfaces have to be manually Restarted:
@bmeeks said in Suricata Interfaces have to be manually Restarted:
Is this problem with no blocking and/or having to manually restart Suricata still occurring? I have been unable to reproduce this, and I've tried in both a 2.4.4 RELEASE virtual machine and a 2.5 DEVEL virtual machine. The blocking module now correctly senses and registers firewall interface IP changes without generating a "tree is null" error and without those invalid kernel IP message errors.
The MD5 hash values for the Suricata binary are different for pfSense 2.4.4 versus 2.5. This is due to the differences in the compiling libraries, but both versions do contain my fix for the problems above.
Hi @bmeeks, unfortunately the problem is still around for me. I tried uninstall and reinstall this morning to see if anything changed, but the md5 is still the incorrect one I posted before. The behavior is still the same as well. I even tried to un/reinstall just before posting this to be sure nothing has changed since earlier this morning. The md5 is still not correct for me.
The MD5 hash you posted last Friday (the one ending in fac7) is the same one I have on my 2.4.4 virtual machine, and that's the version I can't see the problem with. So we need to determine what is different between your setup and my virtual machine.
For starters, is your WAN IP a PPPoE interface or is it a DHCP or static IP setup?
Ah ok, that's good to know.
My secondary WAN IP is configured via DHCP from my Netgear LB1120 4G LTE modem. This modem is configured in bridge mode. That's the one which changes periodically. It is setup as part of a gateway group for failover. Let me know if you need anything else.
Thanks,
Raffi -
@Raffi_ said in Suricata Interfaces have to be manually Restarted:
@bmeeks said in Suricata Interfaces have to be manually Restarted:
@Raffi_ said in Suricata Interfaces have to be manually Restarted:
@bmeeks said in Suricata Interfaces have to be manually Restarted:
Is this problem with no blocking and/or having to manually restart Suricata still occurring? I have been unable to reproduce this, and I've tried in both a 2.4.4 RELEASE virtual machine and a 2.5 DEVEL virtual machine. The blocking module now correctly senses and registers firewall interface IP changes without generating a "tree is null" error and without those invalid kernel IP message errors.
The MD5 hash values for the Suricata binary are different for pfSense 2.4.4 versus 2.5. This is due to the differences in the compiling libraries, but both versions do contain my fix for the problems above.
Hi @bmeeks, unfortunately the problem is still around for me. I tried uninstall and reinstall this morning to see if anything changed, but the md5 is still the incorrect one I posted before. The behavior is still the same as well. I even tried to un/reinstall just before posting this to be sure nothing has changed since earlier this morning. The md5 is still not correct for me.
The MD5 hash you posted last Friday (the one ending in fac7) is the same one I have on my 2.4.4 virtual machine, and that's the version I can't see the problem with. So we need to determine what is different between your setup and my virtual machine.
For starters, is your WAN IP a PPPoE interface or is it a DHCP or static IP setup?
Ah ok, that's good to know.
My secondary WAN IP is configured via DHCP from my Netgear LB1120 4G LTE modem. This modem is configured in bridge mode. That's the one which changes periodically. It is setup as part of a gateway group for failover. Let me know if you need anything else.
Thanks,
RaffiAnd this is an IPv4 address? I'm trying to understand why I can't see the issue in my testing. I simulate WAN IP changes by going to the firewall interface in pfSense and changing the IP. That triggers the same code as a DHCP change would your box, but it works in my test machine.
-
Yes, it's an IPV4 address. Are there any other logs that might help?
This isn't something a system reboot might fix? I like to avoid that, but I might give it a try if all else fails.
To clarify, I'm not sure if I might have two different problems at least according to the suricata error logs.
Problem 1, when my WAN2 IP changes, I get the tree null errors. I'm not sure how that error manifests itself in terms of software issues. Is that what prevented my alert from not being blocked?Problem 2, when suricata performs a rules update, the status on both my LAN and OPT1 interface go from the green check to the red x and each has to be manually restarted. That was indicated in the log by the "[ERRCODE: SC_ERR_PCAP_DISPATCH(20)] - error code -2"
In case it's relevant, here are my packages.
-
Mine seems to be working now, will be keeping an eye on it.
-
I have the same problem, Suricata is not restarting after an update on all the interfaces. Also tried reinstalling the package.
I can start the interfaces manually.MD5: c962d5d995867c5baf3136035a34fac7 -
@digdug3 said in Suricata Interfaces have to be manually Restarted:
I have the same problem, Suricata is not restarting after an update on all the interfaces. Also tried reinstalling the package.
I can start the interfaces manually.MD5: c962d5d995867c5baf3136035a34fac7What messages do you see in the
suricata.logfile for the interfaces that do not restart? I must know what errors are printing to even know where to begin looking for the problem. -
@Raffi_ said in Suricata Interfaces have to be manually Restarted:
Yes, it's an IPV4 address. Are there any other logs that might help?
This isn't something a system reboot might fix? I like to avoid that, but I might give it a try if all else fails.
To clarify, I'm not sure if I might have two different problems at least according to the suricata error logs.
Problem 1, when my WAN2 IP changes, I get the tree null errors. I'm not sure how that error manifests itself in terms of software issues. Is that what prevented my alert from not being blocked?Problem 2, when suricata performs a rules update, the status on both my LAN and OPT1 interface go from the green check to the red x and each has to be manually restarted. That was indicated in the log by the "[ERRCODE: SC_ERR_PCAP_DISPATCH(20)] - error code -2"
In case it's relevant, here are my packages.
Let's first make sure that you don't have a duplicate or zombie Suricata process running. Stop all Suricata instances via the GUI controls, and then open a shell session on the firewall and run this command:
ps -ax | grep suricataYou should see only a single line display (the grep command). If you see any other lines with suricata in them, then kill those processes and try restarting Suricata from the GUI.
Also, at any time in the past have you run a command to manually install Suricata from the shell prompt? Something like
pkg install pfSense-pkg-suricata? Don't do that now, but if you ever did it in the past I found when testing a Snort change a while back that the old copy of the binary installed by the manualpkg installprocess hangs around even when you do a delete and reinstall from the GUI. -
@bose301s said in Suricata Interfaces have to be manually Restarted:
Mine seems to be working now, will be keeping an eye on it.
Thank you for the feedback. Glad it seems to be working for you. As I mentioned in a previous post, I can't make it fail for me on either a 2.4.4. or a 2.5 pfSense machine.
-
@bmeeks
Here is the log:18/6/2019 -- 06:13:53 - <Notice> -- Signal Received. Stopping engine. 18/6/2019 -- 06:13:53 - <Error> -- [ERRCODE: SC_ERR_PCAP_DISPATCH(20)] - error code -2 18/6/2019 -- 06:13:53 - <Info> -- time elapsed 29316.584s 18/6/2019 -- 06:13:53 - <Info> -- (RX#01-vtnet1) Packets 433047, bytes 110221491 18/6/2019 -- 06:13:53 - <Info> -- (RX#01-vtnet1) Pcap Total:433049 Recv:433049 Drop:0 (0.0%). 18/6/2019 -- 06:13:53 - <Info> -- alert-pf output inserted 252 IP address blocks 18/6/2019 -- 06:13:53 - <Info> -- alert-pf output processed 329 alerts 18/6/2019 -- 06:13:53 - <Info> -- alert-pf output inserted 252 IP address blocks 18/6/2019 -- 06:13:53 - <Info> -- alert-pf output processed 329 alerts 18/6/2019 -- 06:13:53 - <Info> -- alert-pf output inserted 252 IP address blocks 18/6/2019 -- 06:13:53 - <Info> -- alert-pf output processed 329 alerts 18/6/2019 -- 06:13:53 - <Info> -- alert-pf output inserted 252 IP address blocks 18/6/2019 -- 06:13:53 - <Info> -- alert-pf output processed 329 alerts 18/6/2019 -- 06:13:53 - <Info> -- Alerts: 0 18/6/2019 -- 06:13:53 - <Info> -- cleaning up signature grouping structure... complete 18/6/2019 -- 06:13:53 - <Notice> -- Stats for 'vtnet1': pkts: 433047, drop: 0 (0.00%), invalid chksum: 0And another one:
18/6/2019 -- 06:13:55 - <Notice> -- Signal Received. Stopping engine. 18/6/2019 -- 06:13:55 - <Error> -- [ERRCODE: SC_ERR_PCAP_DISPATCH(20)] - error code -2 18/6/2019 -- 06:13:55 - <Info> -- time elapsed 29297.555s 18/6/2019 -- 06:13:55 - <Info> -- (RX#01-vtnet0) Packets 19190012, bytes 10423765489 18/6/2019 -- 06:13:55 - <Info> -- (RX#01-vtnet0) Pcap Total:19194208 Recv:19189936 Drop:4272 (0.0%). 18/6/2019 -- 06:13:55 - <Info> -- alert-pf output inserted 0 IP address blocks 18/6/2019 -- 06:13:55 - <Info> -- alert-pf output processed 2 alerts 18/6/2019 -- 06:13:55 - <Info> -- alert-pf output inserted 0 IP address blocks 18/6/2019 -- 06:13:55 - <Info> -- alert-pf output processed 2 alerts 18/6/2019 -- 06:13:55 - <Info> -- alert-pf output inserted 0 IP address blocks 18/6/2019 -- 06:13:55 - <Info> -- alert-pf output processed 2 alerts 18/6/2019 -- 06:13:55 - <Info> -- alert-pf output inserted 0 IP address blocks 18/6/2019 -- 06:13:55 - <Info> -- alert-pf output processed 2 alerts 18/6/2019 -- 06:13:55 - <Info> -- Alerts: 0 18/6/2019 -- 06:13:55 - <Info> -- cleaning up signature grouping structure... complete 18/6/2019 -- 06:13:55 - <Notice> -- Stats for 'vtnet0': pkts: 19190012, drop: 4272 (0.02%), invalid chksum: 0And here the manual start of that last interface:
18/6/2019 -- 08:28:37 - <Notice> -- This is Suricata version 4.1.4 RELEASE 18/6/2019 -- 08:28:37 - <Info> -- CPUs/cores online: 4 18/6/2019 -- 08:28:37 - <Info> -- SSSE3 support not detected, disabling Hyperscan for MPM 18/6/2019 -- 08:28:37 - <Info> -- SSSE3 support not detected, disabling Hyperscan for SPM 18/6/2019 -- 08:28:37 - <Info> -- HTTP memcap: 67108864 18/6/2019 -- 08:28:37 - <Notice> -- using flow hash instead of active packets 18/6/2019 -- 08:28:37 - <Info> -- alert-pf -> Creating automatic firewall interface IP address Pass List. --- CUT --- 18/6/2019 -- 08:28:37 - <Info> -- alert-pf output device (regular) initialized: block.log 18/6/2019 -- 08:28:37 - <Info> -- alert-pf -> Pass List /usr/local/etc/suricata/suricata_38383_vtnet0/passlist parsed: 31 IP addresses loaded. 18/6/2019 -- 08:28:37 - <Info> -- alert-pf -> Created firewall interface IP change monitor thread for auto-whitelisting of firewall interface IP addresses. 18/6/2019 -- 08:28:37 - <Info> -- alert-pf -> Firewall interface IP address change notification monitoring thread started. 18/6/2019 -- 08:28:37 - <Info> -- alert-pf output initialized, pf-table=snort2c block-ip=both kill-state=on block-drops-only=on 18/6/2019 -- 08:28:37 - <Info> -- fast output device (regular) initialized: alerts.log 18/6/2019 -- 08:28:37 - <Info> -- http-log output device (regular) initialized: http.log 18/6/2019 -- 08:28:37 - <Info> -- stats output device (regular) initialized: stats.log 18/6/2019 -- 08:28:37 - <Info> -- Syslog output initialized 18/6/2019 -- 08:28:37 - <Info> -- SSSE3 support not detected, disabling Hyperscan for SPM 18/6/2019 -- 08:28:37 - <Error> -- [ERRCODE: SC_ERR_RULE_KEYWORD_UNKNOWN(102)] - unknown rule keyword 'sip_method'. --- CUT --- 18/6/2019 -- 08:28:39 - <Error> -- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert udp $EXTERNAL_NET any -> $SIP_SERVERS $SIP_PORTS (msg:"PROTOCOL-VOIP Known SIP scanner User-Agent detected"; flow:to_server; sip_header; content:"User-Agent: sip-scan"; fast_pattern:only; metadata:policy max-detect-ips drop, service sip; reference:url,blog.kolmisoft.com/sip-attack-friendly-scanner/; classtype:attempted-recon; sid:48309; rev:2;)" from file /usr/local/etc/suricata/suricata_38383_vtnet0/rules/suricata.rules at line 21407 18/6/2019 -- 08:28:39 - <Info> -- 2 rule files processed. 22211 rules successfully loaded, 203 rules failed 18/6/2019 -- 08:28:39 - <Warning> -- [ERRCODE: SC_ERR_EVENT_ENGINE(210)] - can't suppress sid 2000419, gid 1: unknown rule --- CUT --- 18/6/2019 -- 08:28:39 - <Warning> -- [ERRCODE: SC_ERR_EVENT_ENGINE(210)] - can't suppress sid 2200004, gid 1: unknown rule 18/6/2019 -- 08:28:39 - <Info> -- Threshold config parsed: 16 rule(s) found 18/6/2019 -- 08:28:40 - <Info> -- 22223 signatures processed. 11 are IP-only rules, 8729 are inspecting packet payload, 15311 inspect application layer, 0 are decoder event only 18/6/2019 -- 08:28:40 - <Warning> -- [ERRCODE: SC_WARN_FLOWBIT(306)] - flowbit 'ET.GenericPhish_Excel' is checked but not set. Checked in 2023046 and 0 other sigs --- CUT --- 18/6/2019 -- 08:28:40 - <Warning> -- [ERRCODE: SC_WARN_FLOWBIT(306)] - flowbit 'file.doc|file.docm' is checked but not set. Checked in 43975 and 1 other sigs 18/6/2019 -- 08:28:44 - <Info> -- Using 1 live device(s). 18/6/2019 -- 08:28:44 - <Info> -- using interface vtnet0 18/6/2019 -- 08:28:44 - <Info> -- Running in 'auto' checksum mode. Detection of interface state will require 1000 packets. 18/6/2019 -- 08:28:44 - <Info> -- Set snaplen to 1518 for 'vtnet0' 18/6/2019 -- 08:28:44 - <Info> -- RunModeIdsPcapAutoFp initialised 18/6/2019 -- 08:28:44 - <Notice> -- all 5 packet processing threads, 2 management threads initialized, engine started.Had to cut some "flowbit error messages" and "pass list" to keep the post short
-
@digdug3: I suspect you may have the same underlying problem as another user in a similar thread. He had multiple instances of Suricata running on the same interface, and they were running with memory resident copies of the old binary.
Those PCAP_DISPATCH errors look suspiciously like what I would expect if multiple Suricata instances were trying to execute on the same interface. PCAP might get confused. You can walk through the steps below to check for and kill any duplicate runaway processes, or you can try rebooting the firewall.
-
Go to PACKAGE MANAGER and on the Installed Packages tab click the trash icon to delete Suricata from your firewall. Let that process finish, then proceed to step 2.
-
Open a shell prompt on the firewall and execute this command:
ps -ax | grep suricata-
It should return only a single line showing the
grepcommand you just executed. If you seen any other lines printed containing "suricata", then kill those processes and repeat the shell command until you see no suricata processes running and the only output shown is the singlegrepcommand. -
Now execute this command at the shell prompt:
ls /usr/local/bin/suricata*-
It should find no file by that name. If it does, then delete the file it finds.
-
Return to PACKAGE MANAGER and on the Available Packages tab find and install Suricata again.
-
-
@bmeeks Thanks for the info. Indeed there were some old instances still running after package deletion. Had to kill them using
kill -9 PIDA normal kill did not work.
After package reinstalling all interface came up automatically (as expected).
For your info, the running processes after package deletion:ps -ax | grep suricata 76850 - INs 6:14.59 /usr/local/bin/suricata -i vtnet1 -D -c /usr/local/etc/suricata/suricata_22491_vtnet1/suricata.yaml --pidfile /var/run/suricata_vtnet122491.pid 77805 - INs 17:18.04 /usr/local/bin/suricata -i vtnet0 -D -c /usr/local/etc/suricata/suricata_38383_vtnet0/suricata.yaml --pidfile /var/run/suricata_vtnet038383.pid 78845 - INs 15:48.93 /usr/local/bin/suricata -i vtnet3 -D -c /usr/local/etc/suricata/suricata_21975_vtnet3/suricata.yaml --pidfile /var/run/suricata_vtnet321975.pid 79709 - INs 5:29.14 /usr/local/bin/suricata -i vtnet0.10 -D -c /usr/local/etc/suricata/suricata_4336_vtnet0.10/suricata.yaml --pidfile /var/run/suricata_vtnet0.104336.pid 22120 0 S+ 0:00.00 grep suricataAnd the ls:
ls /usr/local/bin/suricata* ls: No match.I think this fixes the not starting of the interfaces, if not, I'll let you know. Thank you.
