driving me mental, remote login to pfsense CLI to shutdown

jdeloach

@automate Probably need to install the "sudo" package from package manager if it is not already installed and then issue the command 'sudo shutdown -h now'. I think this works for most variants of Linux, not sure about FreeBSD.

Also you may or may not need the '-h' in the command.

automate

thanks same issue :(

i can login with 'ssh user@192.168.1.254' but when i put

ssh user@192.168.1.254 'sudo shutdown -h now'

It fails with:

ssh nsautomate@192.168.1.254 sudo shutdown -h now

We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:

#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.

sudo: no tty present and no askpass program specified

automate

Or this works, but asks me for a password!

ssh -t nsautomate@192.168.1.254 "sudo shutdown -h now"

stephenw10

Have you configured sudo correctly?

Does it work if you manually ssh into pfSense and then run the command?

Steve

johnpoz

see your other thread... Where you said jimp instructions don't work ;)

stephenw10

Aha, so not configured correctly!

automate

Reinstalled the package and now I can execute the shutdown script without a password.

I still cannot login via ssh without a password, despite using the ssh-keygen utility and a copy of the key over. it works for a few minutes then stops working. Very bizzare!

johnpoz

I always login via public key when I ssh.. Not a fan of passwords and ssh - have had zero issue doing this on any pfsense going back to like 1 ;)

Your saying it lets you log in with public key, and then you go to login again and it doesn't? Do a ssh -vvv when you attempt to login.. what do you get? Or what does the pfsense log say about it after you can not login.

automate

LOTS of output hahah!

nsautomate@ihp:/etc/openhab2/rules$ sudo -u openhab ssh -vvv nsautomate@192.168.1.254 'sudo shutdown -h now'
OpenSSH_7.6p1 Ubuntu-4ubuntu0.3, OpenSSL 1.0.2n  7 Dec 2017
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: Applying options for *
debug2: resolving "192.168.1.254" port 22
debug2: ssh_connect_direct: needpriv 0
debug1: Connecting to 192.168.1.254 [192.168.1.254] port 22.
debug1: Connection established.
debug1: key_load_public: No such file or directory
debug1: identity file /var/lib/openhab2/.ssh/id_rsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /var/lib/openhab2/.ssh/id_rsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /var/lib/openhab2/.ssh/id_dsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /var/lib/openhab2/.ssh/id_dsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /var/lib/openhab2/.ssh/id_ecdsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /var/lib/openhab2/.ssh/id_ecdsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /var/lib/openhab2/.ssh/id_ed25519 type -1
debug1: key_load_public: No such file or directory
debug1: identity file /var/lib/openhab2/.ssh/id_ed25519-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_7.6p1 Ubuntu-4ubuntu0.3
debug1: Remote protocol version 2.0, remote software version OpenSSH_7.5
debug1: match: OpenSSH_7.5 pat OpenSSH* compat 0x04000000
debug2: fd 3 setting O_NONBLOCK
debug1: Authenticating to 192.168.1.254:22 as 'nsautomate'
debug3: hostkeys_foreach: reading file "/var/lib/openhab2/.ssh/known_hosts"
debug3: record_hostkey: found key type ED25519 in file /var/lib/openhab2/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys from 192.168.1.254
debug3: order_hostkeyalgs: prefer hostkeyalgs: ssh-ed25519-cert-v01@openssh.com,ssh-ed25519
debug3: send packet: type 20
debug1: SSH2_MSG_KEXINIT sent
debug3: receive packet: type 20
debug1: SSH2_MSG_KEXINIT received
debug2: local client KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha256,diffie-hellman-group14-sha1,ext-info-c
debug2: host key algorithms: ssh-ed25519-cert-v01@openssh.com,ssh-ed25519,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ssh-rsa-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,rsa-sha2-512,rsa-sha2-256,ssh-rsa
debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: compression ctos: none,zlib@openssh.com,zlib
debug2: compression stoc: none,zlib@openssh.com,zlib
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug2: peer server KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256@libssh.org,diffie-hellman-group-exchange-sha256
debug2: host key algorithms: ssh-rsa,rsa-sha2-512,rsa-sha2-256,ssh-ed25519
debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr
debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr
debug2: MACs ctos: hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com
debug2: MACs stoc: hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com
debug2: compression ctos: none,zlib@openssh.com
debug2: compression stoc: none,zlib@openssh.com
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug1: kex: algorithm: curve25519-sha256@libssh.org
debug1: kex: host key algorithm: ssh-ed25519
debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none
debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none
debug3: send packet: type 30
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug3: receive packet: type 31
debug1: Server host key: ssh-ed25519 SHA256:4RCz4gQY4LJRdlMC2Y1ix0IqQp1zR/pQEo8gkSXC0sw
debug3: hostkeys_foreach: reading file "/var/lib/openhab2/.ssh/known_hosts"
debug3: record_hostkey: found key type ED25519 in file /var/lib/openhab2/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys from 192.168.1.254
debug1: Host '192.168.1.254' is known and matches the ED25519 host key.
debug1: Found key in /var/lib/openhab2/.ssh/known_hosts:1
debug3: send packet: type 21
debug2: set_newkeys: mode 1
debug1: rekey after 134217728 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug3: receive packet: type 21
debug1: SSH2_MSG_NEWKEYS received
debug2: set_newkeys: mode 0
debug1: rekey after 134217728 blocks
debug2: key: /var/lib/openhab2/.ssh/id_rsa ((nil))
debug2: key: /var/lib/openhab2/.ssh/id_dsa ((nil))
debug2: key: /var/lib/openhab2/.ssh/id_ecdsa ((nil))
debug2: key: /var/lib/openhab2/.ssh/id_ed25519 ((nil))
debug3: send packet: type 5
debug3: receive packet: type 7
debug1: SSH2_MSG_EXT_INFO received
debug1: kex_input_ext_info: server-sig-algs=<ssh-ed25519,ssh-rsa,rsa-sha2-256,rsa-sha2-512,ssh-dss,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521>
debug3: receive packet: type 6
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug3: send packet: type 50
debug3: receive packet: type 51
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug3: start over, passed a different list publickey,password,keyboard-interactive
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /var/lib/openhab2/.ssh/id_rsa
debug3: no such identity: /var/lib/openhab2/.ssh/id_rsa: No such file or directory
debug1: Trying private key: /var/lib/openhab2/.ssh/id_dsa
debug3: no such identity: /var/lib/openhab2/.ssh/id_dsa: No such file or directory
debug1: Trying private key: /var/lib/openhab2/.ssh/id_ecdsa
debug3: no such identity: /var/lib/openhab2/.ssh/id_ecdsa: No such file or directory
debug1: Trying private key: /var/lib/openhab2/.ssh/id_ed25519
debug3: no such identity: /var/lib/openhab2/.ssh/id_ed25519: No such file or directory
debug2: we did not send a packet, disable method
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug3: send packet: type 50
debug2: we sent a keyboard-interactive packet, wait for reply
debug3: receive packet: type 60
debug2: input_userauth_info_req
debug2: input_userauth_info_req: num_prompts 1

johnpoz

@automate said in driving me mental, remote login to pfsense CLI to shutdown:

debug1: Next authentication method: publickey
debug1: Trying private key: /var/lib/openhab2/.ssh/id_rsa
debug3: no such identity: /var/lib/openhab2/.ssh/id_rsa: No such file or directory
debug1: Trying private key: /var/lib/openhab2/.ssh/id_dsa
debug3: no such identity: /var/lib/openhab2/.ssh/id_dsa: No such file or directory
debug1: Trying private key: /var/lib/openhab2/.ssh/id_ecdsa
debug3: no such identity: /var/lib/openhab2/.ssh/id_ecdsa: No such file or directory
debug1: Trying private key: /var/lib/openhab2/.ssh/id_ed25519
debug3: no such identity: /var/lib/openhab2/.ssh/id_ed25519: No such file or directory
debug2: we did not send a packet, disable method

Well your not sending your public key - so yeah going to fail!

debug1: Offering public key: /home/johnpoz/.ssh/id_ed25519 ED25519 SHA256:y1pJFK<snipped>
debug3: send packet: type 50
debug2: we sent a publickey packet, wait for reply
debug3: receive packet: type 60
debug1: Server accepts key: /home/johnpoz/.ssh/id_ed25519 ED25519 SHA256:y1pJF<snipped>
debug3: sign_and_send_pubkey: ED25519 SHA256:y1pJFKtYk+f2<snipped>
debug3: sign_and_send_pubkey: signing using ssh-ed25519
debug3: send packet: type 50
debug3: receive packet: type 52
debug1: Authentication succeeded (publickey).
Authenticated to sg4860.local.lan ([192.168.9.253]:22).

automate

scratching head

Im not sure what im doing wrong. Can you point me to some kind of tutorial john to do that? I was under the impression i was

johnpoz

If your environment doesn't auto find the key to send, then you would have to call it out in your cmd line for ssh.

btw: you don't need to send that direct command, you can just run /etc/rc.halt

automate

I followed this:

https://www.tecmint.com/ssh-passwordless-login-using-ssh-keygen-in-5-easy-steps/

johnpoz

Yeah those guides tell you how to set it up, no need for me to even read it - but your ssh client has to know where the key it is to use.. See how it pulls my key from my home dir..

Setup your local environment to use the key(s) you want.. Be it windows or linux... Im running openssh client on windows..

There is a .ssh dir in c:\users\username - this is where you keys would normally go

automate

Thats not going to work.

This is a non interactive setup, what happens is my linux machine (with openhab) runs a script which executes this command as the 'nsautomate' user.

Theres no ability for me to specify keys etc, because its not occuring like that.

What im doing right now is simply 'testing' the command via a shell, but the end state is the openhab user will run this command

johnpoz

Well its going to have to be able to send the key, or how would it possible to auth..

automate

i thought the keys were saved using the link i mentioned above to the local and remote machine, so when it logs in, its there. That was the whole point.

I used the ssh copy etc

johnpoz

I think you should research how public key auths.. Yes there is part on the server that you saved on pfsense, but the client has to send the other part to actually auth.

Running this on linux you can call out in the path directly or the envirnoment of the user running ssh would have it in their path.. You can see when you ran the script where it looked for the key.. Place your private side there.

when you ran the cmd it was looking here for keys it could send
Trying private key: /var/lib/openhab2

yeah when you created the keys, sure you saved it somewhere - but it has to be specified where it is and its name in the cmd you run, or the enviornment of the system needs to know where to find it, ie your /var/lib/openhab2 dir is where it was looking for the keys it could send because you didn't call it out in the cmd.

-i would call out path/file to use to auth with from the cmd line with ssh

automate

@johnpoz OK, so i copied the key to that directory and the same issue persists.

johnpoz

And your sending the key - what does -vvv show you for the process