Backup and restore from vm installed to netgate sg-3100
-
I am using Pfsense 2.4.4-RELEASE-p2 as vm installed and purchased the netgate hardware SG-3100 . Please let me know if i can restore the pfsense from vm to hardware . Please share the pros and cons if any .....My thought, it should not be an issue.
-
Yes that should work.
How many interfaces do you have in the VM? If it's more than 3 there would be some work required to separate LAN ports on the SG-3100 with the switch configuration. 3 or less should import directly.
Steve
-
Thanks for reply .....No there is only 1 lan port and 1 Wan port configured with couples for IPSec VPN and Port forwarding.....
-
Should be no problem then. When you restore the config in the GUI it should ask you re-assign the interfaces from whatever they are now to the mvnetaX NICs in the SG-3100 and then it will reboot into the new config.
However I recommend having the serial console connected for that process as in some situations you may need to assign them after the reboot at the console.Steve
-
Okay Thanks ....I will update when I will do it ....