I Created Outbound NAT not working

[barakath]

For network 172.31.98.0 /23 to Another WAN IP But not working

[barakath]

Any one knows let me know

[viragomann]

You will have to provide more details.

How exactly does the rule look like?
What are your other rules?
What is the "other WAN IP"?
Is your outbound NAT in hybrid or manual mode?

[barakath]

@viragomann We have two ISP's 115.110.224.177
Outbound NAT in manual mode

[barakath]

Outbound NAT Interface->source 172.31.98.0 /23 NAT Address 115.110.224.177

[viragomann]

Did you add the rule to the correct interface?

Did also add routing rule to direct traffic out that interface? The outbound NAT rule itself routes nothing.

[barakath]

Where i want to add routing rule? How steps?

[viragomann]

There's a policy routing rule needed if you want to route out traffic to multiple WANs: https://docs.netgate.com/pfsense/en/latest/routing/directing-traffic-with-policy-routing.html

That's a firewall rule with a gateway option. You have to add it to the interface which is facing to the 172.31.98.0/23 subnet.