fix current time

guilherme_egb

I've already downloaded and updated my timezone on pfsense 2.4.2 but my current time is wrong. I've already reboot my pfsense too.

Anyone have an idea how to solve thus problem?

johnpoz

And how much is it off by? Are you syncing to ntp? What does the ntp status show?

This pfsense on hardware or a VM?

BTW - your not current.. You really should be on current 2.4.4p3

guilherme_egb

I'm using the address "pool.ntp.org" for ntp server. Is it correct?

My pfsense is on hardware.

Do you have any solution without upgrade the pfsense for the last version?

guilherme_egb

I've tried to adjust the timezone last week.
My ntp status:
2019-11-11 (1).png

johnpoz

Not saying that the update to current will fix your issue, but you should be current.

pool.ntp.org is fine - you have it marked as pool.. And again what does the status ntp show.. Does it show its syncing?

How much are you off by, few minutes, hours? Days?

edit: Well that shows your fine.. So if your off from what you think it should be I would assume timezone problem.

Why do you think you time is off?

guilherme_egb

In Brazil we have the daylight saving time and when I use the "date" command on Shell, show me the right time, but in the dashboard show me an hour ahead. Current time is wrong.

johnpoz

And what TZ are you set to in the general section? Brazil has what 4 different TZs

What is the output of your date cmd, what tz does it show?

guilherme_egb

I'm using the TZ America/Sao_Paulo.

After typing the date command show:
Mon Nov 11 15:28:50 -03 2019
It's correct.

But in the dashboard show me 16:28:50.

johnpoz

Do

[2.4.4-RELEASE][admin@sg4860.local.lan]/root: date -u
Mon Nov 11 18:34:28 UTC 2019
[2.4.4-RELEASE][admin@sg4860.local.lan]/root: date
Mon Nov 11 12:34:31 CST 2019

Post the output

guilherme_egb

johnpoz

Something not right there.. less it took you like 8 minutes between doing the command ;)

guilherme_egb

Yes, anything is wrong.

I guess that the better solution is upgrade the pfsense.

johnpoz

Not sure of all the changes - but its quite possible there was some change to TZ info between your version and current, etc.. I would for sure update to current... And then if we find a problem with the TZ settings we can submit the problem.

jimp

Also, under System > General Setup, pick a Timezone with a geographic name close to you, do not pick GMT +/- offset type zone.

Gertjan

Also : your system is repaired now https://forum.netgate.com/topic/148033/php-error-timezone ?

guilherme_egb

Yes, this PHP problem has been solved.

Thanks for helping.

johnpoz

So now your time shows correct?

guilherme_egb

I've reboot my pfsense today and then the php is working.

johnpoz

Not what I asked exactly, but take that as a yes to your time is now showing correct everywhere ;)

guilherme_egb

Sorry, I've answered wrong.

Today, I'll try to change my time manually.