IPSEC gateway loop and high latency

[rodrigocar]

We have a PFsense as firewall+VPN and use IPSec to close a conection with our datacenter (Site to Site).
We notice a high latency beetwen us and our servers on the datacenter.
This wasn't happening before, the problem started about 1-2 months ago.
The ping response stays on 150ms and if I run a traceroute I notice that it pass through the GW (192.168.0.254) - 0.358ms, loops again to the GW (192.168.0.254) but the response time is 160ms and then arrives on the other side with a response time of 164ms.
I've ruled out hardware and firewall rules problems because I installed PFsense on another machine from scratch and did only the IPSec configuration, the results was the same.
I attached a print with the results.

FYI

• PFSense 2.4.4-RELEASE-p3
• Hardware
  CPU Type Intel(R) Xeon(R) CPU E5620 @ 2.40GHz
  8 CPUs: 1 package(s) x 4 core(s) x 2 hardware threads
  Memory - 16GB

Any help is welcome... thanks everyone!!!
ipsec.png

[rodrigocar]

@rodrigocar said in IPSEC gateway loop and high latency:

We have a PFsense as firewall+VPN and use IPSec to close a conection with our datacenter (Site to Site).
We notice a high latency beetwen us and our servers on the datacenter.
This wasn't happening before, the problem started about 1-2 months ago.
The ping response stays on 150ms and if I run a traceroute I notice that it pass through the GW (192.168.0.254) - 0.358ms, loops again to the GW (192.168.0.254) but the response time is 160ms and then arrives on the other side with a response time of 164ms.
I've ruled out hardware and firewall rules problems because I installed PFsense on another machine from scratch and did only the IPSec configuration, the results was the same.
I attached a print with the results.

FYI

• PFSense 2.4.4-RELEASE-p3
• Hardware
  CPU Type Intel(R) Xeon(R) CPU E5620 @ 2.40GHz
  8 CPUs: 1 package(s) x 4 core(s) x 2 hardware threads
  Memory - 16GB

Any help is welcome... thanks everyone!!!
ipsec.png

Anyone can help me with that problem?