NAT forwarded ports
-
I am currently forwarding a few ports between from an external address on one WAN to an external address on my seconday WAN. Is there a way to add SNAT to the forwarded traffic leaving the second WAN?
-
Yes you can add an outbound NAT rule on WAN2 to do that. You would have to choose the matching carefully though since I assume source address could be anything.
Steve
-
Problem possibly located. If a interface IP is changed those changes do not appear to update any NAT services even during a reload. Only a reboot and then re-creating the NAT rules appeared to work
-
Depends how you have the rules configured. If they are using references like 'interface IP' and 'WAN address' etc they should update.
Hard coded IPs will not update there.Steve
-
@stephenw10 Nothing was hard coded but I confirmed the issue with tcpdump. The areas where this impacted me seemed to be only in NAT functions