PFSense 2.4.4 User Authentication Using Zentyal 6.1
-
I am having issues authenticating users using PFSense 2.4.4 configured with a Zentyal 6.1 Active Directory Domain Controller. This is the only domain controller on my network. I think that I have properly added a connection to my domain controller under System/User Manager/Authentication Servers. Because I can go to System/User Manager/Settings pick the Authentication Server that I created and click save and test and it will show me the OU's that are configured on my domain controller and the other 3 checks are ok. However when trying to enter a username and password it will not authenticate. Going under Diagnostics/Authentication selecting the Authentication Server, then entering my username and password shows authentication failed. Any thoughts or ideas would be helpful. For some more architecture reference, I am running PFSense on a Proxmox VM along with the domain controller. In the domain resolver service I have a host override configured pointing to the domain controller. Under Diagnostics/DNS Lookup it does return the IP Address and is also able to ping the DC. Zentyal is also running on the Proxmox host but is on a different Vlan than the PFSense server itself. I am able to ping to and from both using both IP Addresses and DNS names. The domain is a registered domain with a private subdomain for my home lab. When doing authentication I tried logging everything going to the domain controller from PFSense and looked at the logs in the domain controller and neither one is showing traffic during authentication requests. Also I have this setup as a standard TCP connection in the Authentication server, but will eventually want to move to a secure connection. Thank you for your time and suggestions.