Lan to WAN

herken

Hello,

i m a newbie in the domain of firewall and i would to do something very easy. I have a computer on the LAN port of the firewall, receive IP from DHCP Server of the PfSense. I would be able to access to the internet normally.

My actual configuration :

Port LAN : 1 computer for test receive IP 192.168.0.50 (configured in the DHCP). It receive DNS, i manually entry it in the DHCP Server configuration (from my router configuration). All seems Ok on the test computer.
Port WAN : My router is connected (Router = 192.168.0.1), the pfsense have an IP from the router (192.168.0.14), i use the diagnostic tools and i can traceroute google.com using this config :
Ip protocol : IPVA
Source address : LAN

I tried to create a rule and a route but i'm not sure what's the good way to do it.

Can you tell me the good practice? I just forget something somewhere ..

Thanks !!

netblues

@herken You can't have lan and wan on the same subnet. As it is now, traffic is not passing through pfsense, so it cannot be controlled.

herken

Hello thanks for reply,

i changed ip on the lan to 10.0.0.1 and dhcp 10.0.0.10 to .20.

No change i can't reach any website and i don't see anything in the firewall log... Something else?

Thakns!

netblues

@herken What default gw is dhcp setting?
Post your firewall and nat rules.

ptt

Check: https://docs.netgate.com/pfsense/en/latest/routing/connectivity-troubleshooting.html

herken

@netblues The gateway is 192.168.0.1

here a capture of the rules

My question is : At the first configuration , have i to create a special rule to permitt to the computer to access to internet?

Thanks!

herken

@ptt Hi i will check thanks

I find this , maybe, problem?

I dont't know why is "pending" status and why i see same gateway ip

ptt

With a "default" pfSense install, you should get "internet" on LAN

You don't need Rules on WAN.... (your WAN Rules useless)

Check:

https://docs.netgate.com/pfsense/en/latest/firewall/firewall-rule-basics.html

https://docs.netgate.com/pfsense/en/latest/firewall/firewall-rule-processing-order.html

ptt

https://docs.netgate.com/pfsense/en/latest/routing/connectivity-troubleshooting.html

Sin título.png

herken

@ptt Thanks for your help, it's working and was because there was a gateway in the lan !

Thank you very much !