Shared object "libarchive.so.7" not found, required by "pkg"

[tkriviradev]

First restore the repository file:

/usr/local/share/pfSense/pkg/repos: cp pfSense-repo-245.conf pfSense-repo.conf

Second step is to re-install pkg

pkg bootstrap -f

Third clean-up and update

pkg clean all && pkg update

if not error try

pkg search vim # and then install whatever

[caligo-erik]

@qinn said in Shared object "libarchive.so.7" not found, required by "pkg":

Downgraded pkg

Bumped into this post; how did you downgrade pkg?

When I try the same command, I get:
pkg-static: Newer FreeBSD version for package pfSense-pkg-iperf

I am unsure whether to use the suggested " IGNORE_OSVERSION=yes " option..

[stephenw10]

No don't do that. You are trying to pull a version of pkg from a repo set to a different FreeBSD version. That is not the same as forcing a package downgrade within the same version.

Steve

[Qinn]

@qinn said in Shared object "libarchive.so.7" not found, required by "pkg":

Think I found it, the pkg package gets updated when in GUI from System/Update/System update you select "Update Latest 2.4.x development version (2.4.5)" in Branch and I did not confirm it, just selected it!

[2.4.4-RELEASE][root@pfSense.localdomain]/root: pkg -v
1.12.0
[2.4.4-RELEASE][root@pfSense.localdomain]/root: pkg-static install -f pkg
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.
Checking integrity... done (0 conflicting)
The following 1 package(s) will be affected (of 0 checked):

Installed packages to be DOWNGRADED:
        pkg: 1.12.0 -> 1.10.5_6 [pfSense]

Number of packages to be downgraded: 1

The operation will free 1 MiB.

Proceed with this action? [y/N]: y
[1/1] Downgrading pkg from 1.12.0 to 1.10.5_6...
[1/1] Extracting pkg-1.10.5_6: 100%
You may need to manually remove /usr/local/etc/pkg.conf if it is no longer needed.
[2.4.4-RELEASE][root@pfSense.localdomain]/root: pkg -v
1.10.5

Selected it and...

[2.4.4-RELEASE][root@pfSense.localdomain]/root: pkg -v
1.12.0
[2.4.4-RELEASE][root@pfSense.localdomain]/root:
``

@caligo-erik but why would you do it? Just like @stephenw10 advises don't change the package manager version.

[tkriviradev]

@caligo-erik

If you want to stay on 2.4.5-RELEASE-p1 for a while before upgrading, make sure you go to System|Update and change your Branch to "Previous stable version". This will keep your System|Package Manager from offering Updates that may not be suitable for 2.4.5

[caligo-erik]

@qinn said in Shared object "libarchive.so.7" not found, required by "pkg":

@qinn said in Shared object "libarchive.so.7" not found, required by "pkg":

Think I found it, the pkg package gets updated when in GUI from System/Update/System update you select "Update Latest 2.4.x development version (2.4.5)" in Branch and I did not confirm it, just selected it!

[2.4.4-RELEASE][root@pfSense.localdomain]/root: pkg -v
1.12.0
[2.4.4-RELEASE][root@pfSense.localdomain]/root: pkg-static install -f pkg
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.
Checking integrity... done (0 conflicting)
The following 1 package(s) will be affected (of 0 checked):

Installed packages to be DOWNGRADED:
        pkg: 1.12.0 -> 1.10.5_6 [pfSense]

Number of packages to be downgraded: 1

The operation will free 1 MiB.

Proceed with this action? [y/N]: y
[1/1] Downgrading pkg from 1.12.0 to 1.10.5_6...
[1/1] Extracting pkg-1.10.5_6: 100%
You may need to manually remove /usr/local/etc/pkg.conf if it is no longer needed.
[2.4.4-RELEASE][root@pfSense.localdomain]/root: pkg -v
1.10.5

Selected it and...

[2.4.4-RELEASE][root@pfSense.localdomain]/root: pkg -v
1.12.0
[2.4.4-RELEASE][root@pfSense.localdomain]/root:
``

@caligo-erik but why would you do it? Just like @stephenw10 advises don't change the package manager version.

It all started with wanting to install a package using the GUI, and no packages were available. I read on some forums, that it might be a temporary issue, so I waited a couple of days, and retried.

Then I tried to update to 2.5, but it got stuck.

Since then I've been reading up on various posts of people with similar problems, ultimately bumping into this one.

I've already create a backup config.xml file and - unless I can fix this otherwise first - will do a reinstall over the weekend.

[adamw]

@stephenw10

After upgrading SG-3100 to 2.4.5-p1 a while ago my pkg appears completely broken, can't even check its version:

[2.4.5-RELEASE][root@pfsense]/root: pkg -v
Shared object "libarchive.so.7" not found, required by "pkg"

I'm suspecting it resulted from branch switching: https://forum.netgate.com/topic/159349/frozen-package-update

So solving one problem created another.

Is there any low risk fix that can be applied remotely?

[stephenw10]

The only thing you can do is try the suggestions here:
https://docs.netgate.com/pfsense/en/latest/troubleshooting/upgrades.html#upgrade-not-offered-library-errors
Some of those are not without risk though.

Steve

[adamw]

@stephenw10

Thank you Steve.

I'm rather planning to upgrade from 2.4.5-p1 to 21.02.2.

Mainly to mitigate OpenVPN randomly crashing with (fixed in OpenSSL 1.1.1j and later):

cipher_ctx_update: EVP_CipherUpdate() failed
Exiting due to fatal error

Is the upgrade likely to fix pkg? Are there any special steps I should consider?

[stephenw10]

Yes, if the upgrade runs it will all be replaced but getting to run requires pkg to be working....

[adamw]

@stephenw10

So I HAVE to fix pkg manually first before even consider a full upgrade, right?

[caligo-erik]

@caligo-erik said in Shared object "libarchive.so.7" not found, required by "pkg":

@qinn said in Shared object "libarchive.so.7" not found, required by "pkg":

@qinn said in Shared object "libarchive.so.7" not found, required by "pkg":

Think I found it, the pkg package gets updated when in GUI from System/Update/System update you select "Update Latest 2.4.x development version (2.4.5)" in Branch and I did not confirm it, just selected it!

[2.4.4-RELEASE][root@pfSense.localdomain]/root: pkg -v
1.12.0
[2.4.4-RELEASE][root@pfSense.localdomain]/root: pkg-static install -f pkg
Updating pfSense-core repository catalogue...
pfSense-core repository is up to date.
Updating pfSense repository catalogue...
pfSense repository is up to date.
All repositories are up to date.
Checking integrity... done (0 conflicting)
The following 1 package(s) will be affected (of 0 checked):

Installed packages to be DOWNGRADED:
        pkg: 1.12.0 -> 1.10.5_6 [pfSense]

Number of packages to be downgraded: 1

The operation will free 1 MiB.

Proceed with this action? [y/N]: y
[1/1] Downgrading pkg from 1.12.0 to 1.10.5_6...
[1/1] Extracting pkg-1.10.5_6: 100%
You may need to manually remove /usr/local/etc/pkg.conf if it is no longer needed.
[2.4.4-RELEASE][root@pfSense.localdomain]/root: pkg -v
1.10.5

Selected it and...

[2.4.4-RELEASE][root@pfSense.localdomain]/root: pkg -v
1.12.0
[2.4.4-RELEASE][root@pfSense.localdomain]/root:
``

@caligo-erik but why would you do it? Just like @stephenw10 advises don't change the package manager version.

It all started with wanting to install a package using the GUI, and no packages were available. I read on some forums, that it might be a temporary issue, so I waited a couple of days, and retried.

Then I tried to update to 2.5, but it got stuck.

Since then I've been reading up on various posts of people with similar problems, ultimately bumping into this one.

I've already create a backup config.xml file and - unless I can fix this otherwise first - will do a reinstall over the weekend.

Update:
FINALLY I got round to pluck up the courage to reinstall pfSense with the newer version.
It was actually very simple, you can copy the config file to the USB installer disk, and it will use it during install.

I did, however, make a full clone of the hard-disk before doing so, better safe than sorry

[caligo-erik]

@adamw said in Shared object "libarchive.so.7" not found, required by "pkg":

@stephenw10

So I HAVE to fix pkg manually first before even consider a full upgrade, right?

I didn't manage to fix pkg manually. In fact, I managed to get pkg from "partially working" to "not working at all"

In the end, I went for a export config to USB installer -> reinstall.

[stephenw10]

Yeah pkg/pkg-static is required to run the upgrade so it must be functional.

Reinstalling and restoring the config is often faster and easier if you've ever done it before.

Steve

[ipfftw]

This post is deleted!