Cant route to bridged external IP's. All other users can. Just not my internal LAN

  • Some small problem I am sure....

    I have a 4 port PfSense. WAN with LAN connected and all working fine.

    I also have a bridge with WAN and OPT1 and OPT2 (makes and OPT3 BRIDGE)

    From the LAN network (private 192 addresses) I can get anywhere on the net, but not my bridged public IP's.

    Other external users can get to the bridged IP's (http, ping etc.. ). Just my LAN cannot. But I can get anywhere else on the internet.... Strange.

    When I trace route to one of the bridge public IP's it stops at the WAN gateway and stops:

    1 ( 7.615 ms 2.382 ms 1.261 ms
    2 ( 1.388 ms 1.334 ms 1.251 ms
    3 ( 1.841 ms 48.825 ms 2.866 ms
    4 * * *
    5 * * *
    6 *^C

    .65 is the WAN gateway.

    Is this a routing problem perhaps?

    Any ideas on how to fix this are very welcome. I dont have any firewall rules in place that would prevent this.
    Seems like a WAN gateway issue, but only for the 2 IP's I have bridged (they are public IP's).


Log in to reply