Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    IPv6 setup with public subnet

    Scheduled Pinned Locked Moved IPv6
    13 Posts 5 Posters 1.1k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • JKnottJ
      JKnott @demonmaestro
      last edited by

      @demonmaestro said in IPv6 setup with public subnet:

      "This is a /112 assignment on my port." So I am guessing they are routed to me.

      You can't assume that.

      Also, you'd use SLAAC on the LAN side, where you'd have a /64 prefix. While you could use DHCPv6, SLAAC is easier to set up.

      What ISP are you with? Maybe someone else here has experience with them.

      PfSense running on Qotom mini PC
      i5 CPU, 4 GB memory, 32 GB SSD & 4 Intel Gb Ethernet ports.
      UniFi AC-Lite access point

      I haven't lost my mind. It's around here...somewhere...

      1 Reply Last reply Reply Quote 0
      • demonmaestroD
        demonmaestro
        last edited by demonmaestro

        I gave the ISP a shout and they are giving me a /64.
        Had to talk to some different people in the chain. I will look into the SLAAC.

        Thank you for the help.

        *edit: Had a space between m e.

        JKnottJ 1 Reply Last reply Reply Quote 0
        • JKnottJ
          JKnott @demonmaestro
          last edited by

          @demonmaestro

          How are they providing that /64? Routed or just a block of address at the modem? A /64 you can get either way, but anything bigger requires routing. With my ISP, when my modem is in bridge mode, I get a /56 routed to me. However, in gateway mode, I just get a /64, which is not routed.

          PfSense running on Qotom mini PC
          i5 CPU, 4 GB memory, 32 GB SSD & 4 Intel Gb Ethernet ports.
          UniFi AC-Lite access point

          I haven't lost my mind. It's around here...somewhere...

          1 Reply Last reply Reply Quote 0
          • demonmaestroD
            demonmaestro
            last edited by

            Just a block of IPs. I must configure the "router" to do what I want with them.

            1 Reply Last reply Reply Quote 0
            • DerelictD
              Derelict LAYER 8 Netgate
              last edited by

              IPv6 does not work like that. They should route at least a /56 to your WAN interface. You would then put a /64 on each inside interface. You would have 256 of those.

              Chattanooga, Tennessee, USA
              A comprehensive network diagram is worth 10,000 words and 15 conference calls.
              DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
              Do Not Chat For Help! NO_WAN_EGRESS(TM)

              demonmaestroD 1 Reply Last reply Reply Quote 0
              • demonmaestroD
                demonmaestro @Derelict
                last edited by

                @Derelict unfortunately all they gave me was a /112. initially.
                Then today when I called them they said that they will give me a /64. But IF I want anything more than that that I would have to go directly to ARIN.

                JKnottJ 1 Reply Last reply Reply Quote 0
                • JKnottJ
                  JKnott @demonmaestro
                  last edited by

                  @demonmaestro said in IPv6 setup with public subnet:

                  @Derelict unfortunately all they gave me was a /112. initially.
                  Then today when I called them they said that they will give me a /64. But IF I want anything more than that that I would have to go directly to ARIN.

                  Some ISPs are really pathetic. Many ISPs hand out /56s or even /48s, though I have heard of /60. These prefixes are routed, so they can be split into /64s by the customer's router. As I mentioned, a single /64 can be routed or not. You'll have to ask the ISP to find out. Also, what ISP are you with? Maybe someone else here has worked with them.

                  PfSense running on Qotom mini PC
                  i5 CPU, 4 GB memory, 32 GB SSD & 4 Intel Gb Ethernet ports.
                  UniFi AC-Lite access point

                  I haven't lost my mind. It's around here...somewhere...

                  1 Reply Last reply Reply Quote 0
                  • kiokomanK
                    kiokoman LAYER 8
                    last edited by

                    this is insane, a /48 could be assigned to every human in the world for the next 480 years before they run out. your isp will go out of business before that ...
                    ask for at least a /56 if they don't want to give it to you, tell everywhere that this isp sucks and change it asap if you can

                    ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                    Please do not use chat/PM to ask for help
                    we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                    Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                    JKnottJ 1 Reply Last reply Reply Quote 2
                    • JKnottJ
                      JKnott @kiokoman
                      last edited by

                      @kiokoman said in IPv6 setup with public subnet:

                      this is insane, a /48 could be assigned to every human in the world for the next 480 years

                      There are enough /48s to give every single person on earth over 4000 of them. This is with only 1/8 of the IPv6 address space assigned to GUAs. Over 3/4 of the address space isn't even allocated to anything.

                      PfSense running on Qotom mini PC
                      i5 CPU, 4 GB memory, 32 GB SSD & 4 Intel Gb Ethernet ports.
                      UniFi AC-Lite access point

                      I haven't lost my mind. It's around here...somewhere...

                      dotdashD 1 Reply Last reply Reply Quote 0
                      • dotdashD
                        dotdash @JKnott
                        last edited by

                        @JKnott said in IPv6 setup with public subnet:

                        There are enough /48s to give every single person on earth over 4000 of them. This is with only 1/8 of the IPv6 address space assigned to GUAs. Over 3/4 of the address space isn't even allocated to anything.

                        <devils advocate>
                        This is true, but it is not reflected in the price ARIN charges for v6 space. For a small provider, the annual fee doubles when you go from a /40 (256 customer allocations) to a /36 (4096 customer sites), and doubles again when you go to a /32 (65,536 sites). Probably smaller shops are trying to cut costs on v6 deployment, as it offers little benefit to them if they have sufficient v4 space.
                        </devils advocate>

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.