What does this mean , I do not have this ip#
-
It's been over 2 decades since I used GNATBOX and syslog, since then I've used regular ISP routers and just burried my head in the sand. my question is about the 192.168.100.10 ? at the bottom of what I posted . what is that all about ? my LAN is 192.168.1.1 and OPT lan that I use only for my wireless AP is 10.0.0.1 . so any thoughts about it ? one more I'm not using OpenVPN on the PFsense yet , but I see one line saying it's loading it ? I am using Openvpn on my Synology box, but that is over the 192.168.1.x ip it has.
I finally broke down and bought a nice appliance , but I keep seeing this in the ( Status System Logs System General ) I know I'm sharing my wan ip .
Feb 8 08:13:10 php-fpm 72428 /index.php: Successful login for user 'admin' from: 192.168.1.180 (Local Database)
Feb 7 03:12:09 php-fpm 72428 /index.php: User logged out for user 'admin' from: 192.168.1.180 (Local Database)
Feb 7 02:46:03 php-fpm 72428 /index.php: Successful login for user 'admin' from: 192.168.1.180 (Local Database)
Feb 4 00:09:36 php-fpm 32197 /rc.start_packages: Restarting/Starting all packages.
Feb 4 00:09:35 check_reload_status Starting packages
Feb 4 00:09:35 php-fpm 342 /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 192.168.100.10 -> 71.83.214.34 - Restarting packages.
Feb 4 00:09:34 check_reload_status Reloading filter
Feb 4 00:09:34 php-fpm 343 /rc.newwanipv6: Removing static route for monitor fe80::201:5cff:fe94:be46 and adding a new route through fe80::201:5cff:fe94:be46%igb0
Feb 4 00:09:32 php-fpm 342 /rc.newwanip: Creating rrd update script
Feb 4 00:09:32 php-fpm 342 /rc.newwanip: Resyncing OpenVPN instances for interface WAN.
Feb 4 00:09:30 check_reload_status Reloading filter
Feb 4 00:09:30 check_reload_status updating dyndns wan
Feb 4 00:09:28 php-fpm 343 /rc.newwanipv6: The command '/usr/local/sbin/unbound -c /var/unbound/unbound.conf' returned exit code '1', the output was '[1580746168] unbound[43048:0] error: bind: address already in use [1580746168] unbound[43048:0] fatal error: could not open ports'
Feb 4 00:09:28 php-fpm 342 /rc.newwanip: The command '/usr/local/sbin/unbound -c /var/unbound/unbound.conf' returned exit code '1', the output was '[1580746168] unbound[41329:0] error: bind: address already in use [1580746168] unbound[41329:0] fatal error: could not open ports'
Feb 4 00:09:27 php-fpm 343 /rc.newwanipv6: rc.newwanipv6: on (IP address: 2600:6c50:7002
b4c3:3bbf:631d:1103) (interface: wan) (real interface: igb0).
Feb 4 00:09:27 php-fpm 343 /rc.newwanipv6: rc.newwanipv6: Info: starting on igb0.
Feb 4 00:09:23 php-fpm 342 /rc.newwanip: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Feb 4 00:09:23 check_reload_status Restarting ipsec tunnels
Feb 4 00:09:23 php-fpm 32197 /rc.linkup: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Feb 4 00:09:23 rtsold Starting dhcp6 client for interface wan(igb0)
Feb 4 00:09:23 rtsold Received RA specifying route fe80::201:5cff:fe94:be46 for interface wan(igb0)
Feb 4 00:09:22 php-fpm 342 /rc.newwanip: IP Address has changed, killing states on former IP Address 192.168.100.10.
Feb 4 00:09:22 php-fpm 342 /rc.newwanip: rc.newwanip: on (IP address: 71.83.214.34) (interface: WAN[wan]) (real interface: igb0).
Feb 4 00:09:22 php-fpm 342 /rc.newwanip: rc.newwanip: Info: starting on igb0.
Feb 4 00:09:21 kernel arpresolve: can't allocate llinfo for 192.168.100.1 on igb0
Feb 4 00:09:21 php-fpm 32197 /rc.linkup: Starting rtsold process
Feb 4 00:09:21 php-fpm 32197 /rc.linkup: Accept router advertisements on interface igb0
Feb 4 00:09:21 php-fpm 32197 /rc.linkup: calling interface_dhcpv6_configure.
Feb 4 00:09:21 check_reload_status rc.newwanip starting igb0
Feb 4 00:09:20 php-fpm 343 /rc.start_packages: Restarting/Starting all packages.
Feb 4 00:09:19 check_reload_status Starting packages -
Do you have a cable modem? If so, that address in 192.168.100.0/24 is most likely the private local DHCP address the cable modem will hand out on its LAN side when it does not have a valid connection back to the cable company's CMTS. Once a session with the CMTS is established, your modem will give your LAN side equipment a valid routable IP address. Notice how the logs tell you it is essentially removing the old 192.168.100.10 address and then assigning a more normal routable address in that 71.83.214.0 subnet.
-
@rtoledo2002 said in What does this mean , I do not have this ip#:
192.168.100.10
Look up who is the gateway of the WAN.
Visit it using your browser -> slap head and problem solved ;) -
@bmeeks that's it. it's Spectrum's modem . thanks
