No SNMP traffic data yet?



  • On my 2.0 box I'm only getting system configuration data from snmp.  e.g.:

    
    [bfccomputing@luck-penguin ~]$ snmpwalk -c public -v 1 bfc-gw
    sysDescr.0 = STRING: bfc-gw.bfccomputing.com 0 FreeBSD 7.1-RELEASE-p4
    sysObjectID.0 = OID: enterprises.12325.1.1.2.1.1
    sysUpTimeInstance = Timeticks: (63586) 0:10:35.86
    sysContact.0 = STRING: Bill McGonigle
    sysName.0 = STRING: bfc-gw.bfccomputing.com
    sysLocation.0 = STRING: 79 Hanover St.
    sysServices.0 = INTEGER: 76
    sysORLastChange.0 = Timeticks: (0) 0:00:00.00
    sysORID.1 = OID: enterprises.12325.1.1.1.10.2
    sysORID.2 = OID: enterprises.12325.1.1.1.10.3
    sysORID.3 = OID: snmpMIB
    sysORID.4 = OID: enterprises.12325.1.1
    sysORDescr.1 = STRING: udp transport mapping
    sysORDescr.2 = STRING: lsock transport mapping
    sysORDescr.3 = STRING: The MIB module for SNMPv2 entities.
    sysORDescr.4 = STRING: The MIB module for the Begemot SNMPd.
    sysORUpTime.1 = Timeticks: (0) 0:00:00.00
    sysORUpTime.2 = Timeticks: (0) 0:00:00.00
    sysORUpTime.3 = Timeticks: (0) 0:00:00.00
    sysORUpTime.4 = Timeticks: (0) 0:00:00.00
    snmpInPkts.0 = Counter32: 58
    snmpInBadVersions.0 = Counter32: 0
    snmpInBadCommunityNames.0 = Counter32: 0
    snmpInBadCommunityUses.0 = Counter32: 0
    snmpInASNParseErrs.0 = Counter32: 0
    snmpEnableAuthenTraps.0 = INTEGER: disabled(2)
    snmpSilentDrops.0 = Counter32: 0
    snmpProxyDrops.0 = Counter32: 0
    
    

    On my 1.2 box, that'll return 5000 lines of data.  I have all the checkboxes marked in the SNMP setup, except for traps, which I'm not using.


Log in to reply