-
can it help you ?
> # dmesg Copyright (c) 2013-2018 The HardenedBSD Project. Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.2-RELEASE-p16-HBSD fc65add89c3(stable/20.1) i386 FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) VT(vga): resolution 640x480 HardenedBSD: initialize and check features (__HardenedBSD_version 1100056 __FreeBSD_version 1102000). CPU: VIA Nano U3400@800MHz (800.05-MHz 686-class CPU) Origin="CentaurHauls" Id=0x6fa Family=0x6 Model=0xf Stepping=10 Features=0xafc9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x8863a9<SSE3,MON,VMX,EST,TM2,SSSE3,CX16,xTPR,SSE4.1,POPCNT> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> VIA Padlock Features=0x1ec33dcc<RNG,AES,AES-CTR,SHA1,SHA256,RSA> VT-x: HLT,PAUSE TSC: P-state invariant real memory = 1073741824 (1024 MB) avail memory = 1012875264 (965 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <031412 APIC1628> ioapic0 <Version 0.3> irqs 0-23 on motherboard ioapic1 <Version 0.3> irqs 24-47 on motherboard Timecounter "TSC" frequency 800047908 Hz quality 1000 random: entropy device external interface wlan: mac acl policy registered kbd1 at kbdmux0 000.000024 [4213] netmap_init netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xc116f230, 0) error 19 random: registering fast source VIA Nehemiah Padlock RNG random: fast provider: "VIA Nehemiah Padlock RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <031412 XSDT1628> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xfc000000-0xfcffffff,0xfb800000-0xfbffffff irq 40 at device 1.0 on pci0 vgapci0: Boot video device pcib1: <ACPI PCI-PCI bridge> irq 27 at device 3.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 31 at device 3.1 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 35 at device 3.2 on pci0 pcib3: [GIANT-LOCKED] pci3: <ACPI PCI bus> on pcib3 em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xdc00-0xdc1f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 32 at device 0.0 on pci3 em0: Using MSIX interrupts with 3 vectors em0: Ethernet address: 00:0d:b4:0d:f9:02 em0: netmap queues/slots: TX 1/1024, RX 1/1024 pcib4: <ACPI PCI-PCI bridge> irq 39 at device 3.3 on pci0 pci4: <ACPI PCI bus> on pcib4 em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xec00-0xec1f mem 0xfebe0000-0xfebfffff,0xfebdc000-0xfebdffff irq 36 at device 0.0 on pci4 em1: Using MSIX interrupts with 3 vectors em1: Ethernet address: 00:0d:b4:0d:f9:03 em1: netmap queues/slots: TX 1/1024, RX 1/1024 pci0: <network> at device 11.0 (no driver attached) sdhci_pci0: <Generic SD HCI> port 0xcc00-0xcc07 mem 0xfe9ef400-0xfe9ef4ff irq 22 at device 12.0 on pci0 sdhci_pci0: 1 slot(s) allocated atapci0: <VIA VX900 SATA300 controller> port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f irq 21 at device 15.0 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 20 at device 16.0 on pci0 uhci0: LegSup = 0xa000 usbus0 on uhci0 uhci1: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 22 at device 16.1 on pci0 uhci1: LegSup = 0xa000 usbus1 on uhci1 uhci2: <VIA 83C572 USB controller> port 0xb880-0xb89f irq 21 at device 16.2 on pci0 uhci2: LegSup = 0xa000 usbus2 on uhci2 uhci3: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 23 at device 16.3 on pci0 uhci3: LegSup = 0xa000 usbus3 on uhci3 ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfe9ef000-0xfe9ef0ff irq 23 at device 16.4 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 pcib5: <ACPI PCI-PCI bridge> at device 19.0 on pci0 pci5: <ACPI PCI bus> on pcib5 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 pmtimer0 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: parallel port not found. est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor CentaurHauls, msr 84708470800084b device_attach: est0 attach returned 6 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 ugen0.1: <VIA UHCI root HUB> at usbus0 uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <VIA UHCI root HUB> at usbus1 uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <VIA UHCI root HUB> at usbus2 uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ugen3.1: <VIA UHCI root HUB> at usbus3 uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <VIA EHCI root HUB> at usbus4 uhub4: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered ada0 at ata2 bus 0 scbus0 target 1 lun 0 ada0: <TOSHIBA MK1246GSX LB211A> ATA8-ACS SATA 1.x device ada0: Serial Number 97LNF2E8S ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 114473MB (234441648 512 byte sectors) uhub4: 8 ports with 8 removable, self powered ugen1.2: <vendor 0x046d G15 Keyboard Hub> at usbus1 uhub5 on uhub1 uhub5: <vendor 0x046d G15 Keyboard Hub, class 9/0, rev 1.10/0.20, addr 2> on usbus1 uhub5: 4 ports with 2 removable, bus powered random: unblocking device. ugen1.3: <vendor 0x046d G15 Gaming Keyboard> at usbus1 ukbd0 on uhub5 ukbd0: <vendor 0x046d G15 Gaming Keyboard, class 0/0, rev 2.00/1.00, addr 3> on usbus1 kbd2 at ukbd0 ugen1.4: <vendor 0x046d G15 GamePanel LCD> at usbus1 hid_get_item: Number of items(991) truncated to 255 warning: total configured swap (1048576 pages) exceeds maximum recommended amount (496832 pages). warning: increase kern.maxswzone or reduce amount of swap. uhid0 on uhub5 uhid0: <vendor 0x046d G15 Gaming Keyboard, class 0/0, rev 2.00/1.00, addr 3> on usbus1 hid_get_item: Number of items(991) truncated to 255 uhid1 on uhub5 uhid1: <vendor 0x046d G15 GamePanel LCD, class 0/0, rev 2.00/0.20, addr 4> on usbus1 hid_get_item: Number of items(991) truncated to 255 hid_get_item: Number of items(991) truncated to 255 hid_get_item: Number of items(991) truncated to 255 aesni0: No AESNI support. pflog0: promiscuous mode enabled pflog0: promiscuous mode disabled pflog0: promiscuous mode enabled em0: link state changed to UP em0: link state changed to DOWN em0: link state changed to UP pflog0: promiscuous mode disabled pflog0: promiscuous mode enabled pflog0: promiscuous mode disabled pflog0: promiscuous mode enabled pflog0: promiscuous mode disabled pflog0: promiscuous mode enabled em0: link state changed to DOWN em0: link state changed to UP ugen1.2: <vendor 0x046d G15 Keyboard Hub> at usbus1 (disconnected) uhub5: at uhub1, port 1, addr 2 (disconnected) ugen1.3: <vendor 0x046d G15 Gaming Keyboard> at usbus1 (disconnected) ukbd0: at uhub5, port 1, addr 3 (disconnected) ukbd0: detached uhid0: at uhub5, port 1, addr 3 (disconnected) uhid0: detached ugen1.4: <vendor 0x046d G15 GamePanel LCD> at usbus1 (disconnected) uhid1: at uhub5, port 4, addr 4 (disconnected) uhid1: detached uhub5: detached -
It can be the cause?
pci0: <network> at device 11.0 (no driver attached) -
There is no driver that recognises it, that;s the device shown as none0 in the pciconf output.
Ok I typo'd the baud rate! Try:
cu -l /dev/cuau1 -s 19200If there's still nothing look in /dev to see if there are other serial ports.
Steve
-
@stephenw10 said in Install on NETASQ U30 S ?:
cu -l /dev/cuau1 -s 19200
same issue.
I tried cuau0 too# ls /dev acpi ctty hpet0 pass0 ttyu0.lock ttyva ada0 cuau0 io pci ttyu1 ttyvb ada0s1 cuau0.init kbd0 pf ttyu1.init ufs ada0s1a cuau0.lock kbd1 pts ttyu1.lock ufssuspend ada0s1b cuau1 kbdmux0 random ttyv0 ugen0.1 apm cuau1.init klog reroot ttyv1 ugen1.1 apmctl cuau1.lock kmem sndstat ttyv2 ugen2.1 atkbd0 devctl led speaker ttyv3 ugen3.1 audit devctl2 mdctl stderr ttyv4 ugen4.1 auditpipe devstat mem stdin ttyv5 urandom bpf fd midistat stdout ttyv6 usb bpf0 fido netmap sysmouse ttyv7 usbctl console full nfslock ttyu0 ttyv8 xpt0 consolectl geom.ctl null ttyu0.init ttyv9 zero -
Hmm, it's at 9600 on the U70: https://forum.netgate.com/post/882959
Try:
cu -l /dev/cuau1 -s 9600 -
@stephenw10 it's always the same issue..
-
Hmm, you might try some other common board rates. I expect cuaU0 to be the front panel com port, but they might be swapped for some reason.
It could be that the switch in the smallest unit doesn't have a console to access. Can you see what the switch chip is on the board?
Steve
-
On the board I see near the RJ45 connectors a chip named "LB G4P109 LF"
My friend google said that it's a "quad port network transformer"
-
Hmm probably under that small heatsink unfortunately.
What baud rates did you try?
Any BIOS options that might suggest something?
Can you boot the original OS and check the boot messages?
Steve
-
I tried 4800 -> 115200 baudrate.
I will look in the bios tomorow.
OUPS ! Unfortunately I have written pfsense over the old OS
-
I don't see any option in bios thas suggest something. :(
-
[2.4.4-RELEASE][admin@pfSense.local]/dev: stty -a -f /dev/cuau0 speed 9600 baud; 0 rows; 0 columns; lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo -extproc iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -ignbrk brkint -inpck -ignpar -parmrk oflags: opost onlcr -ocrnl tab0 -onocr -onlret cflags: cread cs8 -parenb -parodd hupcl clocal -cstopb -crtscts -dsrflow -dtrflow -mdmbuf cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>; eol2 = <undef>; erase = ^?; erase2 = ^H; intr = ^C; kill = ^U; lnext = ^V; min = 1; quit = ^\; reprint = ^R; start = ^Q; status = ^T; stop = ^S; susp = ^Z; time = 0; werase = ^W; -
@stephenw10 said in Install on NETASQ U30 S ?:
Hmm probably under that small heatsink unfortunately
I took the heatsink off ( I already tear up the warranty label :D)
It's an Atheros AR8328
--> it's not like in the command result where it is written intel --> I need to install a new driver ?
-
Hmm, OK.
It looks like the Atheros AR8328 does not have a serial interface that could be used to configure it unlike the other Netasq devices. That makes things immediately 100x more difficult as you need to configure it via MDC/MDIO or
via the config eprom directly.
Netasq/Stormshield OS is built on FreeBSD though I believe, they have contributed stuff back into the base. Unfortunately though I don't see the 8328 as supported:
https://github.com/freebsd/freebsd/tree/master/sys/dev/etherswitch/arswitch
Unless it's so similar to the 8327 it might be able to use that. We are still talking about significant work to get it running.One thing you might try here is Installing OpenWRT which does have support AR8328 switch. Even if just as a test.
Kind of curious what those jumpers might do but it's hard to recommend you change them without knowing. Are they labelled?
Steve
-
@stephenw10 said in Install on NETASQ U30 S ?:
Netasq/Stormshield OS is built on FreeBSD though I believe, they have contributed stuff back into the base. Unfortunately though I don't see the 8328 as supported:
https://github.com/freebsd/freebsd/tree/master/sys/dev/etherswitch/arswitch
Unless it's so similar to the 8327 it might be able to use that. We are still talking about significant work to get it running.How can I try that ?
@stephenw10 said in Install on NETASQ U30 S ?:
One thing you might try here is Installing OpenWRT which does have support AR8328 switch. Even if just as a test.
I did it PM.
eth1 is a Broadcomm, but down. nothing appends when i plug a cable in one of 4 ports.
I don't know what test I have to do.@stephenw10 said in Install on NETASQ U30 S ?:
Kind of curious what those jumpers might do but it's hard to recommend you change them without knowing. Are they labelled?
Yes they are : JP3 et JP4
-
So you did install OpenWRT already?
I'm not sure exactly what you were seeing as Broadcom. The two NIC would still be Intel. It may have created a bridge as OpenWRT usually does.
You probably have to install the correct switch control modules for it to see and recognise the switch. Not entirely sire what those might be though... -
I will search on this way
-
Nothing better...
I don't understand why cu command freez on "connected" -
The 'connected' output is generated by cu, it implies that cu is connected to the port. After that there is nothing there because there is nothing connected to the second com port. It's listening but nothing ever arrives.
You can only configure that switch chip via the MDC/MDIO bus.
Steve
-
@stephenw10 said in Install on NETASQ U30 S ?:
The 'connected' output is generated by cu, it implies that cu is connected to the port. After that there is nothing there because there is nothing connected to the second com port. It's listening but nothing ever arrives.
In bios COM1 and COM2 are mapped with physical interface. is there a relation to ?
@stephenw10 said in Install on NETASQ U30 S ?:
You can only configure that switch chip via the MDC/MDIO bus.
it's doable for me ?
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.