Routed(VTI) Based site to site IPSecVPN ping access (tunnel is up but no network traffic) not working when config Dailup VPN
-
Routed(VTI) Based site to site IPSecVPN ping access (tunnel is up but no network traffic) not working when config Dailup VPN (VPN remote gateway IP- 0.0.0.0).
It's will work when i change vpn remote gateway ip from 0.0.0.0 to static(but i have no static ip).
Kindly request you to give solution this problem.
-
In the "Remote Gateway" field you need to specify where to connect to, so 0.0.0.0 is not going to work.
If you don't have a static IP, you're going to have to use dynamic DNS on the remote end, and enter the dyndns hostname into that field.
Good luck!
-
ITS WILL WORK, BCZ OUR COMPETITOR ALREADY DONE THAT