70+ vlans - Upgrade from Netgate SG-4860 to Netgate XG-7100 1U



  • Good day!

    Current setup:

    IGB1 (WAN) - PFSENSE - IGB0 (LAN) / IGB0. XXX ... - SWITCH STACK SG350X

    IGB0. XXX with XXX representing one VLAN 100-170.

    For the XG 7100 I can see a LAGG configured which has two VIDs.

    		<wan>
    			<enable></enable>
    			<if>lagg0.4090</if>
    			<mtu></mtu>
    			<ipaddr>dhcp</ipaddr>
    			<ipaddrv6>dhcp6</ipaddrv6>
    			<subnet></subnet>
    			<gateway></gateway>
    			<blockpriv></blockpriv>
    			<blockbogons></blockbogons>
    			<dhcphostname></dhcphostname>
    			<media></media>
    			<mediaopt></mediaopt>
    			<dhcp6-duid></dhcp6-duid>
    			<dhcp6-ia-pd-len>0</dhcp6-ia-pd-len>
    			<switchif>switch0.port1</switchif>
    		</wan>
    		<lan>
    			<enable></enable>
    			<if>lagg0.4091</if>
    			<ipaddr>192.168.1.1</ipaddr>
    			<subnet>24</subnet>
    			<ipaddrv6>track6</ipaddrv6>
    			<subnetv6>64</subnetv6>
    			<media></media>
    			<mediaopt></mediaopt>
    			<track6-interface>wan</track6-interface>
    			<track6-prefix-id>0</track6-prefix-id>
    		</lan>
    

    In order to setup virtual interfaces per VLAN, what and where do I have to configure these? Interference possible with LAGG VIDs?

    Curious... ;)

    Regards
    Björn


  • Netgate Administrator

    I think we dealt with this via a support ticket but if not you should open one.

    Steve


Log in to reply