Pfsense 2.4.4 NAT not working

mcardoso

Hello. I'm going through a curious situation. I set up a new firewall, using version 2.4.4.
In this version, I'm not getting NAT to work.

I have another firewall using version 2.3.4, and NAT works perfectly.

I searched the forum, and did not find anything in this regard. Are there any bugs in version 2.4.4, referring to NAT?

What I've already checked:
System -> Advanced -> Firewall & NAT
General configuration

My NAT rule:

Outbound:

Firewall rule:

Has anyone else gone through this situation, who might have some information on the issue?

Gertjan

@mcardoso said in Pfsense 2.4.4 NAT not working:

using version 2.3.4, and NAT works perfectly

Can't remember.

@mcardoso said in Pfsense 2.4.4 NAT not working:

version 2.4.4

That one went up to "p3". Probably with reasons. 2.4.4-p3 is rock solid. I'm using some IPv4 NAT rules, works just fine.

NAT rule : no need to hide local addresses and local ports : we all use he same.

Outbound rule : the most left button is checked by default.
I've the impression some "Mappings" rules are missing ...

Firewall rules : can't see anything so I presume they are not ok.

mcardoso

@Gertjan said in Pfsense 2.4.4 NAT not working:

That one went up to "p3". Probably with reasons. 2.4.4-p3 is rock solid. I'm using some IPv4 NAT rules, works just fine.
NAT rule : no need to hide local addresses and local ports : we all use he same.
Outbound rule : the most left button is checked by default.
I've the impression some "Mappings" rules are missing ...
Firewall rules : can't see anything so I presume they are not ok.

Hidden firewall rules are just blocking some ports and services.

I see no reason why it isn't working. Likewise it is configured in my other pfsense, and it is working perfectly. Only in this 2.4.4 that does not work.

Gertjan

Delete 1,,2,3,4,5,6,7,8. There are useless.
Normally, on a WAN interface you have no rules at all. Exception : NAT rules ....

Rule 9 is part of a NAT rule ? There should be a "from port" as there is a "To port", the 59045.
Do not edit the firewall rule, edit the NAT rule.

What are you trying to achiueve with these WAN firewall rules ?
The NAT rule is for what ?