WebConfigurator

[Mabbus]

ISP DNS    www.test.com (for examle)
^
|
|
Wan  public IP
^
|
|
|
pfsense  <–-LAN  192.168.1.1/24
^
|sys
|
DMZ 192.168.2.1/24

www.test.com have public IP tha is set as WAN port IP
on pfsense there is NAT for web server 192.168.2.2 <->  public ip

from outside I can open web site using public IP

But from DMZ or LAN i get the webConfigurator doesn't matter i type Public IP/. hOW TO LOCK OPENING CONFIGURATOR when i type public IP in LAN net in browser?

Thank you

[jigpe]

Check your Firewall > Rules

jigp
Davao City

[Mabbus]

rulea are ok - allowing everything

I found solution - http://forum.pfsense.org/index.php?topic=4818.0

[jigpe]

Inform me if you got it working :)

jigp
Davao City

[Mabbus]

I changed port to 8080 and protocol to https.
when i typeing public IP in browser my site is not working. I need to type internal address os apache server and only then i get my site.

It's little it sad becoause I use ISP's DNS  and when I typing www.test.com it resolves public IP and not opnening site as described above. But :) still it is not opnening webConfigurator and I am  half glad ))))).

[Eugene]

How do you do this:
@Mabbus:

on pfsense there is NAT for web server 192.168.2.2 <->  public ip

port forwarding or one-to-one nat?
If port forwarding then make sure "Disable NAT Reflection" is not checked in System->Advanced.

[jigpe]

Hows it working mabbus? Be sure your NAT is doing okay. Also try restarting firewall.

jigp
Davao City