Firmware_register and module_register_init errors during boot after updating from 2.4.5 to 2.5.0

[NRgia]

I see the following errors on the logs, after updating to 2.5.0:

module_register_init: MOD_LOAD (vesa, 0xffffffff813dcdc0, 0) error 19
kbd0 at kbdmux0
module_register_init: MOD_LOAD (rt2661_fw, 0xffffffff809c3bb0, 0) error 6
firmware_register: cannot register image rt2661fw, firmware table full!
module_register_init: MOD_LOAD (rt2561s_fw, 0xffffffff809c3b50, 0) error 6
firmware_register: cannot register image rt2561sfw, firmware table full!
module_register_init: MOD_LOAD (rt2561_fw, 0xffffffff809c3af0, 0) error 6
firmware_register: cannot register image rt2561fw, firmware table full!
module_register_init: MOD_LOAD (iwm8000Cfw_fw, 0xffffffff8074bce0, 0) error 6
firmware_register: cannot register image iwm8000Cfw, firmware table full!
module_register_init: MOD_LOAD (iwm7265Dfw_fw, 0xffffffff8074bc80, 0) error 6
firmware_register: cannot register image iwm7265Dfw, firmware table full!
module_register_init: MOD_LOAD (runfw_fw, 0xffffffff80b49d90, 0) error 6
firmware_register: cannot register image runfw, firmware table full!
module_register_init: MOD_LOAD (rsu_rtl8712fw_fw, 0xffffffff80b26ed0, 0) error 6
firmware_register: cannot register image rsu-rtl8712fw, firmware table full!

pfSense version: 2.5.0.a.20200511.0040
Board: https://www.supermicro.com/en/products/motherboard/A2SDi-4C-HLN4F

The above errors were not present on 2.4.5

I didn't notice any functional impact, should I be worried about them?