Suricata IDS and IPS

DaddyGo

@bmeeks I don’t like to write (cringe text) therefore I only need to tell how good other person is

your style is frenetic, especially as you steer the beginner OP onto the right way
maybe you also worked as a teacher at some point?

anx

@DaddyGo said in Suricata IDS and IPS:

etic, especially as you steer the beginner OP onto the right way
maybe you also worked as a teacher at some point?

It's true, it's very rare to find such an approach to other people

DaddyGo

I told you to listen to him and follow (I also learned many - many new things from IPS / IDS from his descriptions and from him "jflsakfja", but unfortunately he is no longer with us

in this confusing world such a mentality, huhuhuh .... rare

you are also a good guy, others right away they are demanding and think they "shiting" out IT

anx

I enabled the IPS Policy to check it. However, still is showing that the blocking is disabled on LAN.

am I doing something wrong? thanks

Also, noticed that only these alerts I can see.

bmeeks

@DaddyGo said in Suricata IDS and IPS:

@bmeeks I don’t like to write (cringe text) therefore I only need to tell how good other person is

your style is frenetic, especially as you steer the beginner OP onto the right way
maybe you also worked as a teacher at some point?

In fact I was a technical instructor for a number of years in my career. I first worked on, and then later taught others how to work on, nuclear power plant control systems. Later I moved over to the Information Technology side of things and worked in cyber security for a number of years before retiring early to enjoy life before I get too old to do so ... .

bmeeks

@anx said in Suricata IDS and IPS:

I enabled the IPS Policy to check it. However, still is showing that the blocking is disabled on LAN.

am I doing something wrong? thanks

Also, noticed that only these alerts I can see.

Enabling a policy will not automatically turn on blocking in either Suricata or Snort. For Snort, you will need to manually enable blocking on the INTERFACE SETTINGS page for the interface. If I recall the setting is called Block Offenders. However, don't rush to enable that until you learn more about tuning your rules.

Those HTTP_INSPECT alerts are the false positives I was talking about. There are several of those rules which alert these days on web traffic that is actually not malicious. Look through those alerts and click the red X beside the GID:SID (Generator ID and Signature ID) column on the ALERTS tab to disable those false positive rules. I personally have a number of those rules disabled in my setup.

Here is a link to an older and long thread with posts from various users showing which rules they enable and disable and why: https://forum.netgate.com/topic/50708/suricata-snort-master-sid-disablesid-conf. It's a good place to start learning about alert suppression and rule disabling.

anx

Hi guys,

How to check if actually IDS is working? I have installed PfBlockerNG to block Adds only.

Since then, I dont see any IDS alerts. Hmm

DaddyGo

Hi,

if you have the ability to run a KaliLinux virtual machine (or nativ), you will find all the tools for the different tests.
I hope you meant pfBlockerNG -devel

anx

@DaddyGo said in Suricata IDS and IPS:

pfBlockerNG -devel

Yes, Devel version.

Ok, will try with Kali. thanks

bmeeks

@anx said in Suricata IDS and IPS:

@DaddyGo said in Suricata IDS and IPS:

pfBlockerNG -devel

Yes, Devel version.

Ok, will try with Kali. thanks

If you have put Snort or Suricata on your LAN, you will need to direct your Kali machine towards that interface.

With a properly tuned IDS you actually don't want to see any alerts as a normal thing. A few alerts now and then is what you would expect. For example, on my LAN my most recent Snort alerts are from April 30th of this year. And those were two HTTP_INSPECT preprocessor rules that mine and my wife's iPhones triggered. I run the IPS Balanced policy on my LAN along with a handful of the ET Open categories.

Because I frequently need data to test with, I also run a Snort instance on my WAN and use a pair of ET Open "known bad IP address" categories enabled there purely to generate alerts for research. I run the Emerging CIARMY and Emerging DSHIELD categories on my WAN to generate that testing data. These two categories are actually just lists of IP addresses from known bad actors. They generate several hundred alerts per day on my WAN from the random Internet "noise" that is always there due to bots scanning for open ports and such.

anx

Hi Guys

Is there any way that when the pfBlockerNG -devel will block website, will actually block it with some information that is blocked by it? Instead that SSL is invalid? thanks

DaddyGo

@anx said in Suricata IDS and IPS:

Hi Guys
Is there any way that when the pfBlockerNG -devel will block website, will actually block it with some information that is blocked by it? Instead that SSL is invalid? thanks

It is included in the name of "advertising"
have you activated the AD block list?

SSL:

bmeeks

@anx said in Suricata IDS and IPS:

Hi Guys

Is there any way that when the pfBlockerNG -devel will block website, will actually block it with some information that is blocked by it? Instead that SSL is invalid? thanks

You will get more responses and better answers to pfBlockerNG questions by posting your question over in the pfBlockerNG forum here: https://forum.netgate.com/category/62/pfblockerng.

anx

Yes, and i am happy to block it. But rather to have ssl invalid would be nice to have information that the pfBlockerNG blocked ad . I See that the blocker replaced the cert ?

DaddyGo

@anx

exactly:
(I know you love to learn, this is an older post (thread) but worth reading)
https://forum.netgate.com/topic/147785/pfblockerng-devel-dnsbl-cert-error

Reddit threads as well, if it is possible

edit:
BTW: Follow @bmeeks Bill's advice, if your question falls into this group (category) and you'd get to know pfBlockerNG, there are good professionals here.

https://forum.netgate.com/category/62/pfblockerng.