Transparent firewall - bridge not work

  • Hello all,

    I'm new with pfsense. I install pfsense 1.2.3 stable on a PC with 2 NIC.

    WAN = Realtek > rl0 > >>>> GO TO >>>> my Lan with many clients
    LAN = old winbond > ed0 > >>>> GO TO >>>> Webserver (linux)

    I bridged LAN > WAN

    set rules

    WAN = PASS *  *  *  *  *  *  ( I think every thing is allowed)
    LAN = PASS *  LAN net  *  *  *  *      Default LAN -> any

    disable NAT: Firewall > NAT >  Outbound > (X)Manual Outbound NAT rule generation (Advanced Outbound NAT (AON))

    in the auto created > (X) No NAT (NOT).

    from my clienst (it's on the WAN Interface) I can ping WAN & LAN ip. (I heare by bridging pfsense will ignore the LAN IP ??) .. but I cannot ping the webserver behind firewall using on the LAN-Interface.

    from Firewall I cannot ping the webserver and from Webserver I cannot ping the Firewall interfaces or someone bevor the wall ..

    someone can help`? I found many howtos but all 2 jears old or older. it doesend work.

    I use

    Thanx, Brian

Log in to reply