Accessing Multiple VDSL Modem Web Interfaces

neocleous

Hi everyone,

I am unable to access my modems web interface despite it being configured as the Netgate documentation specifies. This did work for a time when I had one WAN however adding the second seemed to cause an issue and I was unable to access the first modem so I reconfigured the subnet to /30 for each of the access interfaces (and on the modems). I have set up individual NAT rules for each Modem access network and put them to the top of the list.

The modems are Draytek Vigor 130's in bridge mode set with static IP address in their respective networks.

WAN - PPPoE
WAN2 - PPPoE
LAN- 192.168.0.0/24
Modem access WAN1 192.168.2.0/30
Modem access WAN2 192.168.2.4/30

I hope I have been clear in explain my configuration, if there are any logs or screen shots that might be helpful please let me know.

Thanks

neocleous

I'm thinking I may have posted this in the wrong sub forum, does anyone have any suggestions on where it should go?

ptt

Have you readed ? https://docs.netgate.com/pfsense/en/latest/interfaces/accessing-modem-from-inside-firewall.html

Show what you have done (screenshots)

neocleous

I have yes, that is the document I initially followed, this is my configuration;

EDIT: I just realised the pictures weren't visible, I have updated the links :)

alt text