Can't assign NIC [Aquantia Corp. AQC107]

Gertjan

@Roy360 said in Can't assign NIC [Aquantia Corp. AQC107]:

Apparently I need to build pfsense from scratch?

Noop.
The driver is loaded by the kernel, FreeBSD 11.3 so a "FreeBSD 11.3 system' with compile and link tools will do.

It's probably a lot easier to check if a NIC is supported before you get your hands on one.

stephenw10

Also see:
https://github.com/pfsense/FreeBSD-ports/tree/devel/net/aquantia-atlantic-kmod

and:
https://github.com/Aquantia/aqtion-freebsd

But we do not build that port. It's labelled 'developer preview' which should tell you something. As far as I know it's untested in pfSense.

Steve

Roy360

@Gertjan
I normally just buy Intel NICs, but this NIC came bundled with my ASUS motherboard.

I upgraded to 2.5 development in hopes it might have the driver included, but it didn't, and I couldn't find any detailed steps on how to add drivers so I'm just going to buy a chinese Intel NIC off eBay.

In 1-2 months I'll have my security cameras up and running

Rico

Seems like the driver can't get compiled against FreeBSD 11.3
FreeBSD 12.1 is working fine, but I'm not able to upload files to the forum anymore. Should work with pfSense 2.5.x at least.

-Rico

Rico

Here you go: https://fil.email/i9PmzTNH
Should work for 2.5.0 and could work for 2.4.5 (don't think so).

Disclaimer:
Use at your own risk, take a backup first. I'd not put that in business production, should be fine for home use or playing around in a lab environment.

-Rico

Rico

How the Installation should work (dry run / not tested, I don't own this NIC):
Unzip the file and place if_atlantic.ko into the /boot/kernel/ folder.
Change permissions via console or SSH: chmod 555 /boot/kernel/if_atlantic.ko
Edit /boot/loader.conf.local and add to the end of the file: if_atlantic_load="YES"
Reboot pfSense and see what happens. ;-)

-Rico

stephenw10

Just to test it you can also run at the CLI: kldload if_atlantic.ko

That way if is fails and causes a panic it will still reboot again without loading it.

Steve

Rico

Thanks for this hint Steve.

-Rico

stephenw10

Guess how I'm aware of that trap and what a PITA it is escaping it.

Roy360

@Rico said in Can't assign NIC [Aquantia Corp. AQC107]:

Here you go: https://fil.email/i9PmzTNH
Should work for 2.5.0 and could work for 2.4.5 (don't think so).

Disclaimer:
Use at your own risk, take a backup first. I'd not put that in business production, should be fine for home use or playing around in a lab environment.

-Rico

@stephenw10 said in Can't assign NIC [Aquantia Corp. AQC107]:

Just to test it you can also run at the CLI: kldload if_atlantic.ko

That way if is fails and causes a panic it will still reboot again without loading it.

Steve

Works like a charm and only took a few seconds....
Thanks guys!

Going to spend a few days testing before I make the change permanent.

Rico

Glad you have it working.
Did you also try with 2.4.5-p1 ?

-Rico

Rico

@stephenw10
As THE hardware expert, any idea why make goes downhill in 11.3? ;-)

root@freebsd11:~/freebsd-drv-v0.0.2 # make
machine -> /usr/src/sys/amd64/include
x86 -> /usr/src/sys/x86/include
awk -f /usr/src/sys/tools/makeobjops.awk /usr/src/sys/kern/device_if.m -h
awk -f /usr/src/sys/tools/makeobjops.awk /usr/src/sys/kern/bus_if.m -h
awk -f /usr/src/sys/tools/makeobjops.awk /usr/src/sys/dev/pci/pci_if.m -h
awk -f /usr/src/sys/tools/makeobjops.awk /usr/src/sys/net/ifdi_if.m -h
:> opt_rss.h
Warning: Object directory not changed from original /root/freebsd-drv-v0.0.2
cc -O2 -pipe -DIFLIB -ferror-limit=1  -fno-strict-aliasing -Werror -D_KERNEL -DKLD_MODULE -nostdinc  -I/usr/include -I. -I/usr/src/sys -fno-common  -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer   -MD  -MF.depend.aq_main.o -MTaq_main.o -mcmodel=kernel -mno-red-zone -mno-mmx -mno-sse -msoft-float  -fno-asynchronous-unwind-tables -ffreestanding -fwrapv -fstack-protector -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -Wundef -Wno-pointer-sign -D__printf__=__freebsd_kprintf__ -Wmissing-include-dirs -fdiagnostics-show-option -Wno-unknown-pragmas -Wno-error-tautological-compare -Wno-error-empty-body -Wno-error-parentheses-equality -Wno-error-unused-function -Wno-error-pointer-sign -Wno-error-shift-negative-value -Wno-error-address-of-packed-member  -mno-aes -mno-avx  -std=iso9899:1999 -c aq_main.c -o aq_main.o
aq_main.c:260:3: error: field designator 'isc_tso_maxsize' does not refer to any field in type 'struct if_shared_ctx'; did you mean 'isc_tx_maxsize'?
        .isc_tso_maxsize = HW_ATL_B0_TSO_SIZE,
         ^~~~~~~~~~~~~~~
         isc_tx_maxsize
/usr/include/net/iflib.h:236:13: note: 'isc_tx_maxsize' declared here
        bus_size_t isc_tx_maxsize;
                   ^
fatal error: too many errors emitted, stopping now [-ferror-limit=]
2 errors generated.
*** Error code 1

Stop.
make: stopped in /root/freebsd-drv-v0.0.2
root@freebsd11:~/freebsd-drv-v0.0.2 #

Also tried 11.2 with the same Error. 12.1 is just fine.
I don't have any personal use for this driver, but like to understand what's going wrong there and maybe can give some more help for Roy. :-)

-Rico

stephenw10

Ha, I think you've promoted me.

I would guess it's because that is a driver built on iflib and some part of that is missing. A number of drivers are using that now but only in FreeBSD 12 AFAIK. But that is a guess, my coding skilz are.... not great!

Rico

I was able to build driver version 0.0.5 for FreeBSD 11.3 (pfSense 2.4.5-p1):
https://fil.email/Y9QJQFqv

And here is 0.0.5 for FreeBSD 12.1 (pfSense 2.5.0):
https://fil.email/RdjhicBA

-Rico

AZweimiller

@rico said in Can't assign NIC [Aquantia Corp. AQC107]:

I was able to build driver version 0.0.5 for FreeBSD 11.3 (pfSense 2.4.5-p1):
https://fil.email/Y9QJQFqv

And here is 0.0.5 for FreeBSD 12.1 (pfSense 2.5.0):
https://fil.email/RdjhicBA

-Rico

@Rico Could I trouble you to repost these files? They are expired and it would be a great help. Thanks!

Rico

Yeah sure.
FreeBSD 11.3 (pfSense 2.4.5-p1): if_atlantic0.0.5_freebsd11.3.zip
FreeBSD 12.1 (pfSense 2.5.0): if_atlantic0.0.5_freebsd12.1.zip
They should stay permanent now because I can upload zip files to the Forum again.

-Rico

AZweimiller

@rico Thanks, worked perfectly.

daplumber

@rico URGENT Any chance you could compile for FreeBSD 12.2-STABLE for 2.5.0-RELEASE? The version for 12.1 above crashes it, unsurprisingly...

Thanks in advance!

stephenw10

You should compile it yourself or use the kmod port in FreeBSD 12.2.

It's unlikely there is any issue here but downloading and installing random binaries from the forum is really not a great habit to get into.

Steve

daplumber

@stephenw10 Huh, I couldn’t find the kmod port, I should have said. Yes, yes it’s not advisable. ;-)

Unfortunately I don’t have even a 12.2 VM currently available to build on either. VBox issue with MacOS Big Sur, don’t you know? Grrrr...

Thank you for the link. The naming convention seems to be all over the place on this one.