Route network over IPSec
-
I have two pfsense routers set up at two homes. Site to Site IPSec is working great. I can ping and see everything between the two homes.
At one home I have one subnet 192.168.50.0/24 and at home two I have two subnets 192.168.1.0/24 and 192.168.30.0/24.
I want to route all Internet traffic only from the 192.168.30.0/24 net from home two to home one.
I followed the tutorial on how to route all traffic between sites, but when I do that my dns stops working at home two (192.168.1.0/24).
https://docs.netgate.com/pfsense/en/latest/vpn/ipsec/routing-internet-traffic-through-a-site-to-site-ipsec-vpn.htmlI have the 192.168.30.0/24 net on a VLAN and the IPSec config:
Home 2:
NAT:
Home 1 IPSec:
Home 1 Outbound NAT:
What am I missing?
-
Here is a diagram of the network topology
Home 2 you can think of as remote site with two networks. One network is site to site, while the other network should route all traffic to the HQ (Home 1).