Warning! Do not update with todays 1/10 snapshot!

kiokoman

probably something went wrong during your upgrade, it's ok for me

Raul Ramos

No problem on a proxmox VM (qemu-KVM) x 2 (2 updates in diferente proxmox VMs)
built on Thu Oct 01 00:53:52 EDT 2020

louis2

I did try three times:

one fresh install
two upgrades from 27/9

All three gave problems / failed. Perhaps not all in exactly the same way. I did notice:

once system starting but restarting all the time before it was up
(I think that was with the clean install)
and not finding an OS at all
(I think that was after the upgrades)

I do not know what is causing this. But good to hear that others do not have problems.

Louis

louis2

I just noticed from kiokoman's screenshot that the os has changed from:

FreeBSD 12.2-PRERELEASE to 12.2 STABLE.

That could be a clue, could e.g. be related to a package I installed. I have to investigate.

Louis

kiokoman

@louis2 said in Warning! Do not update with todays 1/10 snapshot!:

not finding an OS at all

strange, it's usually a wrong bios settings like efi instead of bios or vice versa combined with a wrong partition table mbr/gpt

kiokoman

ok it seems that it does not work
if i set efi bios on a vm machine it stop booting after upgrading
also the virtual machine power off alone after the error

I will try again to be sure

louis2

What is also .. strange is that 12.2-STABLE does not exist at all, just as 12.2.-PRERELEASE did not exist !

See https://www.freebsd.org/where.html

For me it would help if the OS-versions as show in pfSense would be in line with formally existing FreeBSD versions

Louis

louis2

I always boot using / from EFI

Louis

kiokoman

nice, there is a new build now.. 20201001.0650, now i need to test it again

louis2

I would not do that, since the change that it is fixed is ... very small

kiokoman

yeah, leave it to me, I can test it in a vm

ok with the new build after the reboot done by the upgrade process you don't lose access to the WebGUI but if you reboot again it does not boot anymore

w0w

2.5.0-DEVELOPMENT (amd64)
built on Fri Oct 02 06:54:02 EDT 2020
FreeBSD 12.2-STABLE

Looks OK in VM (VirtualBOX) UEFI enabled.

w0w

Same for the real hardware.

louis2

@w0w Seeing your positive findings, I did retest.

Sorry to say, but NOT OK here!
System not booting, after update to actual snapshot!

Louis

kiokoman

@w0w
did you reboot twice?

louis2

Given wow his positive message, I did start an update from the gui.

I noticed that the FW did not return / did not become active, so I looked ad my kvm-switch. Trying to boot form network since it could not find any valid local startup partion.

So I did force a restart via "Cntr-Alt-Del" and again noticed no valid boot. Did that another time same result.

So .... not ok yet. Notice that redmine has started an "urgent" issue related to this problem (10943), which is not reported as fixed.

Louis

msm

When I upgraded this morning, system was caught in reboot loop trying to load:

FreeBSD 12.2-STABLE 2c7ab6a3c3f(devel-12) pfSense amd64

When I switched to kernel.old it came up with:

2.5.0-DEVELOPMENT (amd64)
built on Sat Oct 03 06:53:59 EDT 2020
FreeBSD 12.2-PRERELEASE

Crashes are here: https://gist.github.com/emes/cba7dfb53e7127f1b122c6045e341983

AKEGEC

Thanks for the info. I almost upgrade it.

kiokoman

@msm i think you have a different problem for kernel.old
e1000_reset_hw_82571
there is a driver problem with your e1000
but maybe the old kernel is incompatible with other upgrades done by pfsense

msm

Yes, was just filing under warnings for others.

You meant to say "new kernel", no?