Mobile IPSec + Routed Site to Site
-
Hello
I'm trying to setup a solution where a remote user using mobile IPSec can access resources on a network that is on the other side of a VTI Routed IPSec.
The routed Site to Site IPSec works fine, devices in these networks can access each other.
The mobile IPSec users can access devices in the Site A where the mobile IPSec endpoint is connected to, i have set the P2 for the mobile ipsec to tunnel both networks (the 2 networks at either end of the Routed site to site tunnel), but the mobile clients cannot access Site B at the other end of Routed IPSec.
Site B has a static route to send traffic for the mobile client down the IPSec to Site A, a traceroute from Site B shows the traffic going to Site A then it's lost.
I will say that it doesn't look like the mobile IPSec is tunneling the Site B network, i can't see it in the child SA of my test clients connection and i'm not 100% sure why.
Any idea where i should start troubleshooting?
-
@trs_91 I've been running into the same issue. I haven't had time to troubleshoot it really (my workaround is to RDP into a local server then jump over the site to site from there) but I'm interested to see where this thread goes.