Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    SG2100 and internal switch

    Scheduled Pinned Locked Moved Official Netgate® Hardware
    9 Posts 3 Posters 1.6k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • I
      iso667
      last edited by

      Hi guys,

      I hope you could help me with the setup of my relatively new SG-2100.

      I want to setup five VLAN's at home network, it could be something like this:

      VLAN5 - Management (also this will be native VLAN)
      VLAN10 - Home Users
      VLAN20 - IoT
      VLAN30 - Guests
      VLAN40 - Servers

      So I've been playing with the internal switch and I've been able to configure two kinds of ports on the SG-2100:

      • Trunk ports, so I have all the VLAN's on this port and also the VLAN5 as "untagged".
      • Access ports, but I need always these ports to be attached to the "native" VLAN.

      What I want to achieve is, for example, to assign port 2 of the switch to VLAN 20, leave port 1 as a trunk port, and leave ports 3 and 4 on the native VLAN.

      My problem is that the SG-2100 has an "especial" or internal port that is port 5. I have to "pass" the traffic through this port to get everything working, and if I change the configuration of this port I lose management of the box.

      My problem comes in here, I have left my VLAN 5 as vlan 1 on the box to not touch a lot the native vlan and also LAN interface.

      4b9383a9-955f-4d45-8325-594229a16c55-image.png

      I configured VLAN's from 10 to 40 correctly, but I have to set the port 5 as "tagged" for these VLANs.

      So if I want to "untag" a VLAN o a port, for example let's say VLAN 20, what do I have to do with port 5? Because this port is already untagged on VLAN 1, and also tagged for the rest of VLAN's for trunks to work.

      I assume that what I want to achieve here is not possible. Or maybe I have to move "all the ports" to this new VLAN and convert this VLAN as my untagged one. Am I right? Anyone able to have "access-ports" on different VLANs in this box?

      BR!

      ISO

      1 Reply Last reply Reply Quote 0
      • I
        iso667
        last edited by

        Ok, I'm a bit stupid :) I did this and it worked!

        d09c04dc-eeb1-44ab-9c7d-b1c9eb2d08a0-image.png

        I though I had to "remove" the port number 5 also from the untagged VLAN or configured it as untagged on VLAN 20. But with this small change everything started to work.

        Thanks!

        I can delete the post if you prefer that or leave it here for further reference.

        BR!

        ISO

        1 Reply Last reply Reply Quote 0
        • I
          iso667
          last edited by

          No, it is not working :(

          Sorry for the confusion! I have several devices that have a LAN interface and also a WLAN interface, and the device I connected to the SG-2100 was connecting and obtaining its address through WLAN.

          Do you know if it is possible to configure SG-2100 as normal "switch" ports ??

          Thanks!

          ISO

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            The way you have that configured is correct in the switch on the VLANs tab.

            You would also have to set the PVID on port 2 to 20 on the ports tab. That tags untagged packets arriving on port 2 to VLAN 20.

            As long as VLAN 20 is defined, assigned as an interface and has DHCP running a client connected to port 2 should get an IP there.

            Steve

            1 Reply Last reply Reply Quote 1
            • I
              iso667
              last edited by

              Hey Stephen thank you very much for your answer!!!

              I feel like a stupid :D I was looking at this page wondering where to change this...

              84485958-010f-4945-8241-8c3dedc11928-image.png

              Then I realized that if I click on the Port VID field, it is "editable" :D

              a9e5565d-9d2e-4f65-ab60-ee66112c46a5-image.png

              My bad!! I hope it works perfectly now this way :)

              BR!

              ISO

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                Yup, that should do it. Let us know.

                I 1 Reply Last reply Reply Quote 1
                • I
                  iso667 @stephenw10
                  last edited by

                  @stephenw10 Hi Stephen,

                  it is working like a charm :)

                  Thank you for your help!!

                  1 1 Reply Last reply Reply Quote 1
                  • 1
                    11_charlie_brown @iso667
                    last edited by

                    @iso667 , I am looking at setting up my network in a similar fashion as you have described here. Do you have steps you used to setup this configuration?

                    1 Reply Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by

                      Beyond the switch config detailed here you only need to create the VLAN interfaces on mvneta1 and apply firewall rules as required.
                      Are you seeing any particular problem?

                      Steve

                      1 Reply Last reply Reply Quote 0
                      • First post
                        Last post
                      Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.