Update to 2.4.5.1 stopped from working
-
I have a SG-100 that I used the interface to update from 2.4.4.3 to 2.4.5.1. There were some messages about but enough room in the logs, but it went through and did its thing. Now the box IP shows on the network, but there is no way of getting into it. I have rebooted it to no avail. How do I get it back to a state where it will allow me in?
It is not that the password has changed, I get server not found and it does not show a http or https interface available.
Thanks
-
@tim-0 : use the console access.
Tell us what you see ....@tim-0 said in Update to 2.4.5.1 stopped from working:
were some messages about but enough room in the logs
No disk space left crates pure chaos -at best.
The device becomes unresponsive, people start restating by ripping out the power, which will make the file system dirty : things go down hill fast.Why is the disk space getting so low ? You installed packages that produce a lot of log files ?
Check out /var/log/ -
@gertjan
Thanks. I could not have my whole house without internet because the Netgate router bricked itself trying to update, so I went out and bought another I hope is more robust (a Ubiquiti). Perhpas some time, if I have time and interest, I will reinstall everything to get that one back up and running. But with all that is going on right now, my internet access is too critical to be playing games trying to figure out why the piece that connects the house to the outside world quit working.
