[SOLVED] Unable to route outband NAT via Virtual IP
I have a virtual IP added like this:
Let's say address is 126.96.36.199
Then I have a machine connected to my LAN interface with IP 10.1.1.18/24
And outbound NAT configured like this:
Where NAT address is 188.8.131.52
And the settings page:
I've tried setting Port or Range to 1:65000 in both Source and Destination and Translation, I've tried without, I've tried with static port entered.
What the hell am I doing wrong?
Aaaaaaaaaaaand found it myself after RTFM... :-)
To anyone else: Interface is set to LAN in my picture, which it shouldn't.
Interface should be WAN, it's translated from the WAN interface that has the virtual IP.