• I'm hoping someone can help me here. I read through the documentation on netgate regarding setting up Traffic Shaping. Based on what I read I believed that my card was good to go.

    After running the wizard I received the following error:

    There were error(s) loading the rules: pfctl: igb0.100: driver does not support altq - The line in question reads [0]:
    

    I have Intel I-219V chipset which is igb and per the Hardware Limitation page igb are good to go. Does anyone know why I cannot get ALTQ to run? Is there something I can do to get this going?

    Here is what comes up with I run the command pciconf -lv:

    hostb0@pci0:0:0:0:      class=0x060000 card=0x590f1849 chip=0x590f8086 rev=0x06                    hdr=0x00
        vendor     = 'Intel Corporation'
        device     = 'Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Regist                   ers'
        class      = bridge
        subclass   = HOST-PCI
    vgapci0@pci0:0:2:0:     class=0x030000 card=0x59021849 chip=0x59028086 rev=0x04                    hdr=0x00
        vendor     = 'Intel Corporation'
        device     = 'HD Graphics 610'
        class      = display
        subclass   = VGA
    xhci0@pci0:0:20:0:      class=0x0c0330 card=0xa2af1849 chip=0xa2af8086 rev=0x00                    hdr=0x00
        vendor     = 'Intel Corporation'
        device     = '200 Series/Z370 Chipset Family USB 3.0 xHCI Controller'
        class      = serial bus
        subclass   = USB
    none0@pci0:0:20:2:      class=0x118000 card=0xa2b11849 chip=0xa2b18086 rev=0x00                    hdr=0x00
        vendor     = 'Intel Corporation'
        device     = '200 Series PCH Thermal Subsystem'
        class      = dasp
    none1@pci0:0:22:0:      class=0x078000 card=0xa2ba1849 chip=0xa2ba8086 rev=0x00                    hdr=0x00
        vendor     = 'Intel Corporation'
        device     = '200 Series PCH CSME HECI'
        class      = simple comms
    ahci0@pci0:0:23:0:      class=0x010601 card=0xa2821849 chip=0xa2828086 rev=0x00                    hdr=0x00
        vendor     = 'Intel Corporation'
        device     = '200 Series PCH SATA controller [AHCI mode]'
        class      = mass storage
        subclass   = SATA
    pcib1@pci0:0:28:0:      class=0x060400 card=0xa2921849 chip=0xa2928086 rev=0xf0                    hdr=0x01
        vendor     = 'Intel Corporation'
        device     = '200 Series PCH PCI Express Root Port'
        class      = bridge
        subclass   = PCI-PCI
    pcib2@pci0:0:28:5:      class=0x060400 card=0xa2951849 chip=0xa2958086 rev=0xf0                    hdr=0x01
        vendor     = 'Intel Corporation'
        device     = '200 Series PCH PCI Express Root Port'
        class      = bridge
        subclass   = PCI-PCI
    pcib3@pci0:0:29:0:      class=0x060400 card=0xa2981849 chip=0xa2988086 rev=0xf0                    hdr=0x01
        vendor     = 'Intel Corporation'
        device     = '200 Series PCH PCI Express Root Port'
        class      = bridge
        subclass   = PCI-PCI
    isab0@pci0:0:31:0:      class=0x060100 card=0xa2c41849 chip=0xa2c48086 rev=0x00                    hdr=0x00
        vendor     = 'Intel Corporation'
        device     = '200 Series PCH LPC Controller (H270)'
        class      = bridge
        subclass   = PCI-ISA
    none2@pci0:0:31:2:      class=0x058000 card=0xa2a11849 chip=0xa2a18086 rev=0x00                    hdr=0x00
        vendor     = 'Intel Corporation'
        device     = '200 Series/Z370 Chipset Family Power Management Controller'
        class      = memory
    none3@pci0:0:31:4:      class=0x0c0500 card=0xa2a31849 chip=0xa2a38086 rev=0x00                    hdr=0x00
        vendor     = 'Intel Corporation'
        device     = '200 Series/Z370 Chipset Family SMBus Controller'
        class      = serial bus
        subclass   = SMBus
    em0@pci0:0:31:6:        class=0x020000 card=0x15b81849 chip=0x15b88086 rev=0x00                    hdr=0x00
        vendor     = 'Intel Corporation'
        device     = 'Ethernet Connection (2) I219-V'
        class      = network
        subclass   = ethernet
    igb0@pci0:2:0:0:        class=0x020000 card=0x15391849 chip=0x15398086 rev=0x03                    hdr=0x00
        vendor     = 'Intel Corporation'
        device     = 'I211 Gigabit Network Connection'
        class      = network
        subclass   = ethernet
    

    Thank you in advance.