Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Configuring same series of IP in Local and Remote Devices

    NAT
    2
    4
    399
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      sumenair
      last edited by

      Can i configure same series of IP used in both Local and remote devices for an Open VPN solution. For example, the Open VPN server is configured as 192.168.1.0/24 in IPv4 local networks and 192.168.1.0/24 in IPv4 Remote networks, under the Tunnel settings tab

      V 1 Reply Last reply Reply Quote 0
      • V
        viragomann @sumenair
        last edited by

        @sumenair
        No, there will be no routing between these networks possible with such set up.

        S 1 Reply Last reply Reply Quote 0
        • S
          sumenair @viragomann
          last edited by

          @viragomann, Thanks for your response...
          How about if I configure the local devices with 14 IP's as 192.168.1.0/28 (Local IPv4) and the remote sites with the next 14 devices as 192.168.1.16/28 (Remote IPv4).

          Will this type of configuration be possible?

          V 1 Reply Last reply Reply Quote 0
          • V
            viragomann @sumenair
            last edited by

            @sumenair
            Yes, you can do that. That will work if you set the local and remote network correctly in the OpenVPN settings.

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.